Loading ...
Loading ...
Loading ...
27
Features
ESC
FUTURE USE
STATUS
RESET
SERIAL
CONSOLE
A1
A2
A3
B
E
D
C
C1
C2
A
USB Ports: The two USB-A ports
A1
and
A2
connect to one of four
different Tripp Lite EnviroSense2
(E2) environmental sensors*
for remote temperature or
temperature/humidity monitoring
(up to three E2 sensors can be
daisy-chained). The Micro-B USB
port
A3
is used for initial network
interface configuration and direct
console access from a computer
running a terminal emulation
software..
*USB-A ports are designed for use with
E2 modules only. Do not connect other
USB devices to these ports.
Note: Only 2 of 3 USB ports can be
used simultaneously. For example:
2 USB-A (A1 and A2) or 1 USB-B
and the lower USB-A port (A3 and
A1); the upper USB-A port A2 cannot
connect with the USB-B port A3.
B
Serial: Serial connection is for
command line access from a
computer running a terminal
emulation software. The serial
connection uses a 3.5 mm serial
port and the included DB9 to 3.5
mm cable is needed to connect
to this PDU.
C
Ethernet Port: Use this RJ45 jack to connect the PDU to the network
with a standard Ethernet patch cable. The behavior of the Activity LED
C1
and Link LED
C2
is shown in the table below. This port is not compatible
with PoE (Power Over Ethernet) applications.
LED Function LED Color Off On Flashing
Activity Green No Activity — Activity
Link Yellow No Link
Link (Any Speed)
—
Network Interface
Loading ...
Loading ...
Loading ...