Loading ...
Loading ...
Loading ...
SDS5000X Series Digital Oscilloscope User Manual
217 / 236 W W W. S I G L E N T. C O M
27.6 I/O Setting
27.6.1 LAN
Operate the following steps to set the LAN port:
Perform Utility>System Setting>I/O Setting> LAN Config to open the LAN
Config dialog box.
A. Check Automatic (DHCP)
to enable dynamic IP. In
this case the oscilloscope
must be connected to the
local area network with a
DHCP server. Contact your
network administrator to
confirm the relevant
information.
B. When is not checked,
the oscilloscope uses static
IP. Set the static IP
address, subnet mask, and
gateway separately.
C. MAC address of the
oscilloscope, read only.
Loading ...
Loading ...
Loading ...