Loading ...
Loading ...
Loading ...
SDS5000X Series Digital Oscilloscope User Manual
11 0 / 2 3 6 W W W. S I G L E N T. C O M
A. Turn on/off serial decode function
B. Select the bus to set, Decode1 and
Decode2
C. Select the serial bus protocol
D. Touch to set the signal, including the
mapping relation between channels and
bus signals, and the thresholds. This is
similar with the signal setting of serial
trigger.
E. Configure the bus
F. Display the bus or not
G. Set the list of decode result
H. Set the display format of the decode results
(Hex, Decimal, Binary or ASCII)
I. Synchronize the settings between serial
trigger and decode
Below are detailed descriptions of trigger and decode steps for each protocol.
I2C Trigger and Serial Decode
SPI Trigger and Serial Decode
UART Trigger and Serial Decode
CAN Trigger and Serial Decode
LIN Trigger and Serial Decode
错误!未找到引用源。
Loading ...
Loading ...
Loading ...