Loading ...
Loading ...
Loading ...
SDS5000X Series Digital Oscilloscope User Manual
121 / 236 W W W. S I G L E N T. C O M
CS
The CS signal should be set to correct CS Type, including CS, ~CS and Clock
Timeout.
CS – Active high.
~CS – Active low.
Clock Timeout– It is not necessary to specify the source and threshold level
for the CS signal. The only parameter for the CS signal is the timeout Limit,
which is the minimum time that the clock signal must be held idle for before
the oscilloscope acquires valid data. This setting is suitable for case where
CS signal is not connected, or the number of oscilloscope channels is
insufficient (such as two-channel oscilloscopes).
The method of copying settings is the same as I2C signal settings. See "I2C
Signal Settings" for details.
Loading ...
Loading ...
Loading ...