Loading ...
Loading ...
Loading ...
OONNECTIONS
Connection to a TV (Interlace)
- Connecting to your TV using Component video cables.
- You will enjoy high quality and accurate color reproduction images. Component video separates the picture
element into black and white(Y), btue(P_) red(P_) signals to present clear and clean images (Audio signals
are delivered through the audio output.)
1
Using componen[ vleeo cables no[ Incluoeo
connect the COMPONENT VIDEO OUT termlnaI
on the rear ot the DVD-VCR to tt'รท COMPONENT
mNterminal ot your TV
2
Uslng the audio cab es connect the AUOIO _red
and white) OUT terminals on the rear of the
DVD-VOR to the AUDIO trod and white) iN
terrrllnals of our TV.
/\
Turn o_ the DVD-VCR and TV.
3
With the unit _nstop mode setthe AIt woeo
ou[put to Component: Interlace in the DispBay
Setup menu (see pages 57,_58)or press -_ne
PROGRESSIVE button on the _emu_econtrol
Jnttl I_terlace is cutout.
4
Press the _npu_selec[or o _ your TV remote
con_ro_un_ _neComponen_ signal from the DVD-
VOR appears on the TV screen.
Notee
= if Video output is incorrect{y set to S=Video with the Component cables connected, the screen will
turn red.
- If you want to connect to an Amplifier, phase refer to the Amplifier connection page (See pages 17 to 18)
- The component terminal of your TV may be marked "R-Y. B-Y.Y" or "Cr, Cb, Y" instead of "PR. PB, Y"
depending on the manufacturer The number and position of terminals may vary depending on the TV set
Please refer to the useCsmanual of your TV
ENG-15
Loading ...
Loading ...
Loading ...