Loading ...
Loading ...
Loading ...
OONNECTIONS
Before Connecting the BVB-VCR
- Always turn off the DVD-VOR TV, and other components before you connect or disconnect any cables
- Refer to the users manual of the additional components (such as a TV) you are connecting for more
information on those particular components
Connection to a TV
The following shows examples of connections commonly used to connect the DVD-VOR with a TV and other
components.
Connection to a TV (Video)
Ustnc video/audio caoles connec[ [he VIDEO
(ye_low)/AUDJO (red and white_ OUT terminals
on the rear ot the DVD-VCR to the VmDEO
(yeliow)/AUDlO (red and white) _Nterm rials of
your TV.
2
Turn on the DVD-VCR and TV.
3
Press the inpu[ selector on jour TV remote
controi un[ll 1hevideo signal from the DVD-VOR
appears on the TV screen.
Notes
- Noise may be generated if the audio cable is placed too close to the power cable.
- if you want to connect to an Amplifier, please refer to the Amplif{er connection page
(See pages 17 to 18)
- The number and position of terminals may vary depending on your TV set Please refer to the user's manual
of your TV
- if there is one audio input terminal on the TV, connect it to the AUDIO OUT Left (white) terminal of the DVD-
VCR
- If you press the PROGRESSIVE button when DVD-VCR is in stop mode or no disc is inserted the AIt Video
Out mode changes in the following sequence: (S-Video - interlace - Progressive)
- When the AIt Video Output in Display setup menu is set to Progressive, the S-Video Outputs does not work.
ENG-f3
Loading ...
Loading ...
Loading ...