Loading ...
Loading ...
Loading ...
Audio Dubbing El
(ONLY FOR HR-S5900U/5910U)
Connection
This VCR (for recording)
To AUDIO IN Audio cable
(not supplied)
To Audio out
• Audio Dubbing is also possible using the audio
input connectors on the rear panel.
You can replace sounds recorded on the normal track with
new sounds -- for example, your favorite song played back
on the CD player.
• Refer also to the other audio component's instruction
manual for connection and its operations.
Before audio
dubbing
After audio
dubbing
Normal track _I_ _ •r_ _ e[_ _
f
/
Video ,
H'i-Fi track
g Make connections
Connect an audio cable between the VCR's audio
input connectors and the audio component's
audio output connectors.
• If the audio component is monaural, connect
the AUDIO L (MONO) input connector on the
VCR.
Loada cassetteand preparethe audio
source
Select input mode
Select "F-1" -- when connecting the audio
component to the audio input connectors on
the front panel.
Select %-1" -- when connecting the audio
component to the audio input connectors on
the rear panel.
On the front panel:
Push the JOG dial, then turn it to the left or right.
On the Remote:
Press the Number key "0 (AUX)" or CH +/-.
g Locate start point
O Press PLAY ( I_ ) to start playback.
O Press PAUSE ( II ) when you find the beginning
of the scene for which you want to audio-dub.
'1 Activate editing mode
Press A.DUB on the front panel.
• The VCR enters the Audio Dubbing pause mode.
• "iiiiii_blinks, _i:::"and iliili light up on the front
display panel.
Start audio dubbing
Press PLAY ( I_ ) on this VCR and start playing
the audio source.
• C" blinks and iii::" is displayed on the front
display panel.
To stop audio dubbing
Press STOP ( • ) on the Remote or STOP/EJECT( • / _ )
on the front panel.
• Audio dubbing automatically stops when the counter
reading becomes "0:00:00", and the VCR starts normal
playback.
NOTES:
• During Audio Dubbing, the sound recorded on the normal
track is selected as the monitor sound. If you want to listen to
the Hi-Fi or mixed sound (Hi-Fi sound and monaural sound),
see "Selecting monitor sound -- Audio Monitor" (__"pg. 23).
• Audio Dubbing cannot be performed on a tape with its record
safety tab removed.
• When playing back an audio-dubbed tape, select the sound
you want. See "Selecting monitor sound -- Audio Monitor"
(__"pg. 23).
• Picture may be distorted if you pause Audio Dubbing.
Loading ...
Loading ...
Loading ...