Loading ...
Loading ...
Loading ...
_ AccessCable BoxBrandSet screen
Press OK.
Enter cable box brand
Press the appropriate
Number keys to enter
the brand code from the
list shown to the right,
then press OK.
• If the cable box's
channel changes to 9,
setting is complete
Press OK and "CABLE
BOX CONTROL IS
ON" appears on the
screen for about 5
seconds, then it
returns to the normal
screen.
CABLE BOX BRAND SET
CABLE BOX BRAND SET
1
DID YOUR CABLE BOX
CHANGETO CHANNEL 09?
NO
• If the cable box's channel does not change to 9
(_ Press SHUTTLE PLUS/_V to move the
highlight bar (arrow) to "NO".
(_ Press OK.
(_ Repeat step [] until the cable box's channel
changes to 9 by entering another code.
(_ If the channel does not change after going
through all the code numbers listed for your
model of cable box, then try all the other
numbers between 1 and 25.
CABLE BOX BRAND LIST
BRAND CODE
ARCHER
CABLETENNA
CABLEVIEW
CITIZEN
CURTIS
DIAMOND
EASTERN
GC BRAND
GEMINI
GENERAL INSTRUMENTS
1, 5, 17
1,17
15, 16, 17, 21, 25
15, 16, 17, 21, 25
2, 8
1,17
19
15, 16, 17, 21, 25
15
1,4, 6, 11, 12, 15, 28
HAMLIN
JASCO
JERROLD
NOVAVISION
OAK
PANASONIC
PULSER
RCA
REGAL
REGENCY
REMBRANDT
SAMSUNG
SCIENTIFIC ATLANTA
SIGMA
SL MARX
SPRUCER
STARGATE
TELEVIEW
TOCOM
UNIKA
UNIVERSAL
VIDEOWAY
ZENITH
10, 18, 19, 23
15
1,4, 6, 11, 12, 15, 28
2, 8
7, 20
13, 14
15, 16, 17, 21, 25
13, 14
10, 18, 19, 23
19
1,16,17
5, 16, 24
2, 8
7, 20
5, 16, 17, 24, 25
13, 14
5, 15, 16, 17, 21, 24, 25
5, 16, 24
1,4, 16
1,17
16, 17, 25
3, 9, 22
3, 9, 22
If the VCR's clock has not been set (with AUTO
CLOCK set to ON)
"CABLE BOX USERS SET CLOCK MANUALLY" appears for
about 5 seconds when you press OK in step Ira, then the
Clock Set screen appears.
Perform Manual Clock Set on page 12. If you press MENU
after the clock has been set, the Cable Box Brand Set
screen appears.
NOTES:
• The Controller may not work with all types of cable box.
• If your cable box does not respond to any code between 1
and 25, you cannot use the Controller to change cable box
channels. In this case, make sure to leave the cable box
turned on and tuned to the proper channel before the
scheduled start time of timer recording.
Contact your cable company about the possibility of
exchanging your current cable box with the one compatible
with your VCR.
• The VCR can only change the cable box channel through the
Controller during timer recording.
• If your cable box cannot be operated with a remote control
(because it has no remote sensor), you cannot use the
Controller to change its channels. Make sure to leave the
cable box turned on and tuned to the proper channel before
the scheduled start time of timer recording.
• If the VCR's memory backup expires because of a power
failure, set the cable box output channel and brand again.
• For customers in U.S.A.: If you are unable to set the
Controller, contact JVC toll free at 1-800-537-5722.
Loading ...
Loading ...
Loading ...