Loading ...
Loading ...
Loading ...
Showingon-screendisplay
When "SUPERIMPOSE" is set to "ON" (__7_ pg. 39, 40),
you can see the current VCR status on the TV screen.
• For more detailed information about the on-screen
display, see page 63.
1
2
Display VCR status on TV screen
During recording or l" CH 125 RECORD•
recording pause, press [ THU 12:00AM PAUSE
STEREO _ SP
OSD. SAP
All indications
corresponding to the B..... +.... +.... +-I---E
INDEX1
current VCR status are NORM REMAIN 10:00
displayed for 5 seconds. HI-FI COUNT-1:23:45,
The time counter remains
on the screen indicating the elapsed time.
• The indications are not recorded.
Exit on-screen display
Press OSD again.
NOTE:
• If the VCR is in recording pause mode, "RECORD/PAUSE"is
always displayed.
• The VCR status can be also displayed during playback.
NOTES:
• You cannot activate the S-VHS ET function...
- while recording is in progress.
- while timer-recording or Instant Timer Recording (_" pg.
26) is in progress.
- while Video Calibration (_" pg. 40) is in progress.
• S-VHS ETdoes not work with S-VHS tapes.
• To keep the highest quality recording and playback pictures
over a long period of time, S-VHS recording on S-VHS tapes
is recommended.
• Use of high grade tapes are recommended forS-VHS ET
recordings.
On some tapes, picture quality will not improves even if the
S-VHS ET function is used. Check the recording quality
before you start important recordings.
• You can play back S-VHS ET recordings on most of S-VHS
VCRs and of VHS VCR equipped with SQPB (S-VHS QUASI
PLAYBACK) function. (Notice some VCRs are not compatible
with this function.)
• While playing back a tape recorded with this function on
some tapes, noise may appear. (If playback picture becomes
blurred or interrupted, use a cleaning cassette.)
• During special effect playback (_" pg. 28), noise may appear.
If special effect playback is performed frequently on a tape
recorded with this function, the tape may be damaged and
picture may be deteriorated.
RecordingonVHStapeswith
S-VHS quality - super VHSET
This function allows you to record on VHS tapes with S-
VHS picture quality. Tapes recorded using this function
can be played back on a VCR equipped with the S-VHS
ET function.
• You can activate this function only before you start
recording on a VHS tape.
• Before recording, make sure "VIDEO CALIBRATION"
is set to "ON." (__7_ pg. 40)
1
2
Select S-VHS ET mode
Press S-VHS ET on the front panel. The S-VHS ET
lamp lights up.
• The S-VHS indicator lights on the front display
panel.
• To disengage the S-VHS ET mode, press S-VHS FT.
The lamp goes off.
Start recording
On the front panel:
Press REC ( • ).
On the Remote:
While holding REC ( • ), press PLAY ( I_ ).
Other useful functions for recording
Youcan also use the following functions for recording.
• Video Calibration (_:;"pg. 40)
When this function isset to "ON", this VCR checks the
condition of the tape in use during playback and
recording, and compensates to provide the highest-
possible pictures.
• Second Audio Recording (_:_"pg. 41 )
This VCR's built-in MTS decoder enables reception of
Multichannel TV Sound broadcast.
To record a SAP program received, set "2ND AUDIO
RECORD" to "ON" using the menu screen.
NOTE:
When the channel is changed on the VCR;
• The "STEREO" indication appears on the screen for about
5 seconds if the program is a stereo broadcast.
• The "SAP" indication appears on the screen for about
5 seconds if the program is a SAP broadcast.
• Both indications appear when a stereo program is
accompanied by SAP sound.
• S-VHS Recording Mode (_:_"pg. 42)
This VCR allows you to record on an S-VHS tape with VHS
picture quality.
Loading ...
Loading ...
Loading ...