Loading ...
Loading ...
Loading ...
Basic
Playback
Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
POWER JOG dial
STOP/EJECT
(i/±
B
REW ( _ )
POWER
STOP ( • )
This VCR can check the tape condition during playback
(and recording), and realizes the best possible pictures.
il
El
Load a cassette
Make sure the window side is up, the rear label
side is facing you and the arrow on the front of
the cassette is pointing towards the VCR.
Do not apply too much pressure when inserting.
• The VCR turns on automatically.
• The counter is automatically reset to "0:00:00".
• If the cassette's record safety tab has been
removed, playback begins automatically.
Start playback
Press PLAY ( I_ ).
• Tape speed (SPor EP)is automatically detected.
• The S-VHS indicator lights up when you play
back a tape recorded in S-VHS mode or in S-
VHS ET mode (_ pg. 27)
• If "VIDEO CALIBRATION" is set to "ON"
(default setting: _7_ pg. 40), "VIDEO
CALIBRATION" appears on the screen, and this
VCR checks the tape condition during
automatic tracking.
• If the tape ends during playback or fast-forward
search, the cassette indication "_]" blinks for
a few seconds and the VCR starts rewinding the
tape automatical ly.
Tostopplayback
Press STOP ( • ) on the Remote or STOP/EJECT ( • / _ )
on the front panel.
Torewindthe tape
Press REW ( _1_1 ) (or turn the JOG dial on the front
panel to the left).
Tofast-f0rwardthe tape
Press FF ( I_1_ ) (or turn the JOG dial on the front panel
to the right).
Toeject the tape
Press STOP/EJECT ( • / A ) on the front panel when the
tape is not running.
• You can also eject the cassette with the VCR turned off.
Toturn off the VCR
Press POWER.
Clean the video heads using a dry
cleaning cassette -- TCL-2 UX --
when:
• Rough, poor picture appears while a tape is played
back.
• The picture is unclear or no picture appears.
• "USE CLEANING CASSETTE" appears on the screen
(only with "SUPERIMPOSE" set to "ON": _" pg. 39,
40.)
Loading ...
Loading ...
Loading ...