Loading ...
Loading ...
Loading ...
26 fN BASIC PLAYBACK AND RECORDING (cont.)
Basic
Recording
Features
C. RESET
STOP/EJECT ( • / _ )
Changingdisplayinformation
Press DISPLAY during recording or recording pause.
Each time you press the button, the front display panel
shows the time counter, channel number, tape remaining
time and the clock time in sequence.
Time Counter
ClockTime
]--_ Tape Remaining Tim_
]_-- ChannelNo.
• To display the VCR status including the tape remaining
time, the time counter and the clock time on the TV
screen, see "Showing on-screen display" (_ pg. 27).
• The approximate tape remaining time appears and the
"1_'-.."indicator lights on the front display panel.
• The tape remaining time is calculated based on the
tape speed (SPor EP)being used. The indicated
remaining time is only an estimate.
To reset the time counter, press C. RESETon the
Remote. The counter reading becomes "0:00:00". It is
also reset when a tape is inserted.
Specifyingrecordinglength
-- InstantTimer Recording(ITR)
You can easily specify the recording length from
30 minutes to 6 hours and the VCR shuts off after
recording is finished.
During recording, press REC ( • ) on the front panel
repeatedly until the recording length you want appears
on the front display panel.
The Q record) indicator starts flashing.
Each time you press the button, recording length
increases in 30-minute intervals (up to 6 hours).
To cancel an ITR, press STOP ( • ) on the Remote or
STOP/EJECT ( • / _ ) on the front panel.
STOP ( • )
Accidental erasure prevention
To prevent accidental
recording on a recorded
cassette, remove its record
safety tab.
To record on it later, cover
the hole with adhesive tape.
Record safety tab
Watchingone programwhile
recordinganother
J
"1 EngageTV mode
During recording...
• If you connect the TV and the VCR only using
the RF connection (_7_ pg. 7) to view pictures
from the VCR
Press TV/VCR on the Remote so that VCR mode
indicator goes off from the front display panel.
(The TV broadcast being recorded disappears.)
• If you are using the AV connection (_7_ pg. 7) to
view pictures from the VCR, change the TV's
input mode from AV to TV.
A
Z select channel for viewing
Select the channel, you want to watch, on the TV.
Loading ...
Loading ...
Loading ...