Loading ...
Loading ...
Loading ...
TurnontheVCRandtheTV,andselecttheVCR
channel3or4 (orAVmode)ontheTV.
Checkingprogramsettings
1 Disengage timer
Press TIMER, then press POWER.
• When "AUTO TIMER" (_ pg. 40) is set to "ON",
you do not have to press TIMER.
7 AccessProgramCheckscreen
Press PROG. CHECK. _R START STOP CH DATE
8:00P 10:00 12 12/24
10:00A 10:45 40 12/25
11:30P 1:00 125 12/25
Other Useful functions for timer recording
You can also use the following functions for timer
recording.
• Auto Timer (_" pg. 40)
When "AUTO TIMER" is set to "ON", the timer recording
standby mode is automatically engaged when the VCR is
turned off. It is temporarily canceled when the VCR is
turned on. You do not have to press TIMER to engage or
disengage the timer recording standby mode.
• Auto SP --_ EP Timer (_" pg. 41 )
If there is not enough tape to record the entire broadcast
for recording in SP mode, the VCR automatically switches
to EP mode to allow complete recording. This feature is
especially handy when recording a broadcast of more than
2 hours in length.
3
AccessProgram screen
Press PROG. CHECK again to check more detailed
information. Each time you press PROG. CHECK,
the next program's Program screen appears. When
all Program screens are shown, normal screen
resumes.
Cancelingor changingprogram
m.=J
settings
1
2
3
4
AccessProgramscreen
Repeat steps I to 3 above.
Cancelor changeprogramsetting
To cancel a program, press CANCEL when the
Program screen you do not want is shown.
To change a program, press the appropriate button:
START+/-, STOP+/-, DATE+/-, CH+/-, and/or SP/
EP when the Program screen on which you want to
make changes is shown.
Returnto normalscreen
Press PROG. CHECK as many times as necessary
until no Program screen is shown.
Reengagetimer recordingstandbymode
Press TIMER.
• When "AUTO TIMER" (_ pg. 40) is set to "ON",
the timer recording standby mode automatically
resumes when you turn off the VCR.
Loading ...
Loading ...
Loading ...