Loading ...
Loading ...
Loading ...
16EN
INITIAL SETTINGS (cont.)
Access Main Menu screen on VCR
Press MENU.
Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
AccessInitial Set screen
Press SHUTTLE PLUS AV to move the highlight
bar (arrow) to "INITIAL SET", then press OK or
SHUTTLE PLUS _.
!!
AccessCable BoxSet screen
Press SHUTTLE PLUS
AV to move the
highlight bar (arrow) to
"CABLE BOX SET",
then press OK or
SHUTTLE PLUS _.
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
GUIDE CHANNEL SET
DBS RECEIVER SET
Setting cable box output
channel & brand
After installation, set the cable box output's channel and
its brand correctly; otherwise, the Controller cannot
work correctly.
H Turn on cable box
Select a channel other than channel 9 on your
cable box.
Select cable box output channel
Your selection depends CABLEBOXSET
on how your cable box
is connected to your
VCR.
• If your cable box is
connected to your
VCR's ANTENNA IN
terminal on the rear
Press SHUTTLE PLUS AV on the Remote until
the channel number representing the cable
box's output (CH2 - CH9) appears on the
screen.
• If your cable box is connected to your VCR's
A U D IO/VI D EO I N connectors on the front panel
Press SHUTTLE PLUS AV on the Remote until
"ON F-1 (FRONT)" appears on the screen.
• If your cable box is connected to your VCR's
AUDIO/VIDEO IN connectors on the rear panel
Press SHUTTLE PLUS AV on the Remote until
"ON L-1 (REAR)" appears on the screen.
• If you do not use a cable box
Press SHUTTLE PLUS AV on the Remote until
"OFF" appears on the screen.
Loading ...
Loading ...
Loading ...