Loading ...
Loading ...
Loading ...
Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
Access Main Menu screen on VCR
Press MENU.
AccessInitial Set screen
Press SHUTTLE PLUS AV to move the highlight
bar (arrow) to "INITIAL SET", then press OK or
SHUTTLE PLUS _.
!!
AccessDBSReceiverSet screen
Press SHUTTLE PLUS
AV to move the
highlight bar (arrow) to
"DBS RECEIVER SET",
then press OK or
SHUTTLE PLUS _.
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
GUIDE CHANNEL SET
CABLE BOX SET
Setting DBS receiver output
channel & brand
After installation, set the DBS receiver's output channel
and its brand correctly; otherwise, the Controller cannot
work correctly.
il Turnon DBSreceiver
Select a channel other than channel 55, 100 or
205 on your DBS receiver.
11_t Select DBS receiver output channel
Your selection depends DBSRECEIVERSET
on how your DBS
receiver is connected to
your VCR.
• If your DBS receiver
is connected to your
VCR's ANTENNA IN
terminal on the rear
Press SHUTTLE PLUS AV on the Remote until
the channel number representing the DBS
receiver's output (CH3 or CH4) appears on the
screen.
• If your DBS receiver is connected to your VCR's
AUDIO/VIDEO IN connectors on the front panel
Press SHUTTLE PLUS _V on the Remote until
"ON F-1 (FRONT)" appears on the screen.
• If your DBS receiver is connected to your VCR's
AUDIO/VIDEO IN connectors on the rear panel
Press SHUTTLE PLUS AV on the Remote until
"ON L-1 (REAR)" appears on the screen.
• If you do not use a DBS receiver
Press SHUTTLE PLUS AV on the Remote until
"OFF" appears on the screen.
CONTINUED ON NEXT PAGE _,_
Loading ...
Loading ...
Loading ...