Loading ...
Loading ...
Loading ...
TIMER RECORDING (cont.)
JOG dial
24HR QUICK
PROGRAM
36 EN
24HR Quick
Programing
You can program a timer recording that starts within
24 hours. Up to 8 timer recording programs can be
made as far as a year in advance. Remember, the clock
must be set before you can program the timer (_7_ pg. 8
or 10).
Loada cassette
Make sure the record safety tab is intact. If not,
cover the hole with adhesive tape, then load it
into the VCR.
• The VCR turns on, and the counter is reset,
automatical ly.
Access 24HR quick program display.
Push 24HR QUICK PROGRAM. "1-_" and start
time start blinking on the display panel.
i_ Program start time indicator
T'-IS
NOTES:
• If "Err" appears on the display panel, repeat the steps again.
• When a menu screen is shown, you cannot use 24HR quick
programing function. Press MENU to return to normal screen,
and try again.
• You can use 24HR quick programing function also when the
VCR is turned off.
• For 24HR quick programing function, the program overlap
warning display does not appear even if some programs
overlap each other.
• Even ifa power failure occurs, the VCR keeps your timer
programs. However, the clock time, channel settings, and
other menu settings are lost.
As a result, when the power is supplied again to this VCR
after the power failure, the following will take place.
1. This VCR starts the Plug & Play setting automatically to
restore the clock time and channel setting.
2. If the clock time and channel setting are restored correctly,
each timer program you have made will start at its start
time unless its end time has elapsed.
!!
Timer warning display
A warning appears on the
TV screen to tell you that
-WARNING-
the timer-recording is to TIMERRECORDING
start in 5 minutes if you TOSTARTS00N
(CANCEL)
are not in the timer
recording standby mode at
that time. Press TIMER to
put the VCR into timer
recording standby mode. To clear the display, press
CANCEL on the Remote.
Set programstart time
Turn the JOG dial to the left or right. Then, push
the JOG dial. "_1" and start time start blinking on
the display panel. Program start time indicator
(_ 17.17/-I
I-I • I_1I_1
• One click stop of the JOG dial changes the
time in 5-minute intervals.
Set program stop time
Turn the JOG dial to the left or right. Then, push
the JOG dial and channel number will start
blinking. Program stop time indicator
n,-,
_:lJ IJ
• One click stop of the JOG dial changes the
time in 5-minute intervals.
Set channelnumber
Turn the JOG dial to the left or right.
IIN
-IU
• You can cancel the setting at any time by
pressing and holding the JOG dial for more
than 3 seconds. Repeat from the step IN.
Engagetimer recordingstandbymode
Press24HR QUICK PROGRAM.
The VCR turns off automatically and "({)" is
displayed on the front display panel.
Loading ...
Loading ...
Loading ...