Loading ...
Loading ...
Loading ...
38 fN TIMER RECORDING (cont.)
Whenprogramsoverlapeach
other
If "PROGRAM NOT COMPLETED PROGRAM
OVERLAP" appears, you have another program
overlapping the program you have just made.
The Program Check screen appears and conflicting
programs will start blinking.
_ROGRAM NOT COMPLETED
PROGRAM OVERLAP
]
_12 10:00A 10:45 40 12/25
EX. Program 1 (you have just made) and Program 4
overlap each other
1 Confirm overlappingprograms
Overlapping programs blink on the screen.
Z Select program to modify
Press SHUTTLE PLUS AV, then press SHUTTLE
PLUS _.
• You can only select one of the overlapping
programs.
NOTE:
If you do not mind this overlap, press PROG. to finish the
timer program setting. See "ATTENTION" to the right.
Without doing anything for about 1 minute, the VCR will
finish the timer programing.
3
Cancelor changeprogramsetting
To cancel a program, PROGRAM4
press CANCEL when the
START STOP
Program screen you do 9:00 PM --_ 10:00PM
DATE CR
not want is shown. 12/24/00 10 sP
"PROGRAM sun
COMPLETED" appears on
the screen for about
5 seconds, then normal
screen appears.
To change a program, press the appropriate button:
START+/-, STOP+/-, DATE+/-, CH+/-, and/or SP/
EP when the Program screen on which you want to
make changes is shown, then press OK.
"PROGRAM COMPLETED" appears on the screen
for about 5 seconds, then normal screen appears.
NOTE:
If the overlap is not yet solved or another overlap occurs
with the timer program setting made last after making
correction on a program, the conflicting programs will be
shown on the Program Check screen again. Repeat the
above steps again until the overlap is solved.
ATTENTION
If there is a conflict in the timer schedule and one program
overlaps with another, only the parts shown below in gray
will be recorded.
Pattern 1: The program with the Iower program
number will be recorded.
10:00 11:00 12:00
Program 1
Program 2 [ CH40 _ Not recorded
Pattern 2: The program starting earlier will be
recorded.
10:00 11:00 12:00
Program 1 I _ I
Program 2 _ Not recorded
Pattern 3: The program starting earlier will be
recorded, followed by the remaining portion
of the other program.
10:00 11:00 12:00
Program 1 IH_I
Program 2 I . IB_I
1"
Not recorded
Loading ...
Loading ...
Loading ...