Loading ...
Loading ...
Loading ...
You can use a camcorder as the playback VCR and your
VCR as the recording VCR
g Make connections
Connect an audio/video cable between the
camcorder's audio/video output connectors and
your VCR's audio/video input connectors.
• When the JVC camcorder is equipped with the
Master Edit Control, you can control the VCR
from the camcorder. Connect the mini-plug
cable (not supplied with this VCR) as illustrated
to the left.
• When using a camcorder with a monaural
output, connect the audio output connector on
the camcorder to the left audio input connector
on this VCR.
F_ Loada cassette
Insert the cassette to be recorded on into this
VCR (for recording).
Select input mode on this VCR
Select %-1" -- when connecting the camcorder
to the audio/video input
connectors on the rear panel.
Select "F-1" -- when connecting the camcorder
to the audio/video input
connectors on the front panel.
On the front panel:
Push the JOG dial, then turn it to the left or right.
On the Remote:
Press the Number key "0 (AUX)" or CH +/-.
Select video input terminal
Follow the procedure described on pages 39 and
43.
When using S VIDEO terminal, set "FRONT AUX
INPUT" (or "REAR AUX INPUT" if you use the
connectors on the rear) to "S-VIDEO".
When using VIDEO terminal, set "FRONT AUX
INPUT" (or "REAR AUX INPUT") to "VIDEO".
Set "PICTURE CONTROL" to "EDIT"
Follow the procedure described on pages 39 and
40.
Set "AV COMPU-LINK" to "OFF"
Follow the procedure described on pages 39 and
42.
• The REMOTE PAUSE/AV COMPU-LINK
connector works as the Remote Pause
connector when "AV COMPU-LINK" is set to
"OFF".
Return to normal screen
Press MENU.
Start playback
Press PLAY ( I_ ) on the camcorder.
NOTE:
If the camcorder is equipped with a superimpose/OSD
disable feature then set it to "OFF" before starting
playback.
Start recording
On the front panel:
Press REC ( • ).
On the Remote:
Press REC ( • ) and PLAY ( I_ ) at the same time.
• If you are using a Master Edit Control-equipped
JVC camcorder, recording starts automatically
on this VCR. (Refer to camcorder's instruction
manual.)
NOTE:
Be sure to select "AUTO" for "PICTURE CONTROL" (or
"NORM" when "VIDEO CALIBRATION" is set to "OFF") after
you finish dubbing the tapes (__"pg. 39 and 40).
If your camcorder is a JVC Master Edit Control-
equipped type -- go to step I!.
If your camcorder is NOT a JVC Master Edit
Control-equipped type -- go to step g.
Loading ...
Loading ...
Loading ...