Loading ...
Loading ...
Loading ...
Connecting to External Devices
Remote & Accessories
Connect remote controls or other accessories, such as keyboard, mouse and gamepad, to interact with your
console with ease.
Connect Remote Control
Connect a Bluetooth remote control
Pair the Bluetooth remote with the console.
1.
To pair the Bluetooth remote control to the console after you power the console on, press button on
your remote control, and select Settings > Network > Bluetooth, and set Bluetooth to On.
2. Keep the remote control within 3 metres of the console. Press any button (except power and mic button) to
pair the remote control with the console.
Note:
•
In special cases, press and hold button to pair.
• This function may not be applicable in some models/countries/regions.
• If an error occurred while trying to pair the remote control, it could have been caused by interference. Try
to remove what is causing the interference and try pairing again.
• If an error occurred with the remote control while using sufficiently charged batteries, you can remove the
batteries for 1~2 seconds then insert them once again. Now the remote control should work correctly.
• The remote control cannot be paired to the console while the console is in standby mode.
Use HDMI & CEC
Use the console remote to control external devices that are connected to the console by a HDMI cable. The
external devices need to support HDMI & CEC function.
Press button on your remote control and select Settings > System > HDMI & CEC.
Connect an external device through HDMI & CEC function
Press button on your remote control and select Settings > System > HDMI & CEC > CEC Control.
Allow HDMI devices to control each other.
1. Set CEC Control to On.
2. Connect a HDMI & CEC compatible device to the console.
3. Turn on the connected external device. The device will be connected to the console automatically. After
connection is completed, you can access the menu of the connected device on your screen using your
console remote and control the device.
4. When CEC control is enabled and HDMI & CEC compatible external devices are turned off, the console will
enter the standby mode. The function needs to be supported by the external device.
Enable peripheral auto power off
Press button on your remote control and select Settings > System > HDMI & CEC > Peripheral
Auto Power Off.
Set to On to turn off HDMI & CEC compatible external devices when the console is turned off.
16
Loading ...
Loading ...
Loading ...