Loading ...
Loading ...
Loading ...
Basic System Setup4
4.1 STEP 1: Connect cameras
NOTE
This step is for verification of the camera image only. It is recommended to connect cameras to a nearby power
adapter for this step. The Lorex Setup Wizard that runs at startup will assist you in naming and organizing your
cameras, so it is also recommended to leave cameras connected until the wizard asks you to install cameras in
their permanent mounting location.
Option 1: Direct Connection to NVR
Test your cameras prior to selecting a permanent mounting location by temporarily connecting
the cameras and cables to your recorder. Connect the cameras to the recorder using the RJ45
Ethernet extension cables provided with your cameras.
Option 2: Connect Cameras to Local Network
You can also connect your IP cameras to your local network for flexible installations. For details,
see 4.8 Connecting Cameras to the Local Area Network (LAN), page 9.
NOTE
Before selecting a permanent mounting location for your cameras, see 5 Camera Installation, page 11 for impor-
tant notes and installation tips.
4.2 STEP 2: Connect router
Connect the recorder to your router using the included Ethernet cable.
NOTE
To receive automatic firmware updates and enable remote viewing with mobile apps, a high speed Internet con-
nection is required (minimum upload speed of 5Mbps required for 4K viewing; 3.5Mbps for lower resolutions).
All other system features can be used without an Internet connection.
4.3 STEP 3: Connect mouse
Connect the included mouse to a USB port on the recorder.
#LX400113; r. 7.0/56940/56940; en-US 6
Loading ...
Loading ...
Loading ...