Craftsman 32021195 7-1/4" compound miter saw

User Manual - Page 7

For 32021195.

PDF File Manual, 45 pages, Download pdf file

Loading ...
Loading ...
Loading ...
ELECTRICALSAFETY
z&WARNING: Do not permit fingers to touch the terminal or plug when
Installing or removing the plug from an outleL
1 Double insulated tools are equipped w_th a
polarized plug (one blade is wider than the
other)_Thls plug will fit in a polarized outlet
only one way_ If the plug does not fit fully in the Cover of (_lj_'_
outlet, reverse the plug_ If it still does not lit, Grounded
contact a qualified electrlctan to install a Outlet Box-- _ _.._-.
polarized outlet Do not change the plug in any (_..jIt'_
way
2 Double lnsulalfonD eliminates the need for the
three-wire grounded power cord and grounded
power supply system. Applicable only to Class tl
(double-insulated) tools This compound miter
saw is a double insulated tool
z_WARNING: Double Insulation DOES NOT take the place of normal
safety precautions when operating thtstool.
3 BEFORE plugging in lhe tool, BE SURE that the outlet voltage supplied is withtn
the voltage marked on the tool's data plate DO NOT use "AC only" rated tools with
a DC power supply,
4 AVOID body contact with grounded surfaces, such as pipes, radiators, ranges
and refrigerators There Is an increased risk of electric shock if your body is
grounded
5 DO NOT expose power tools to rain or wet conditions or use power too_s In
wet or damp locations. Water entering a power tool wtl_ increase the rlsk of
electric shock This tool is intended for indoor use only
6 if operating a power tool In damp locations Is unavoidable, ALWAYS USE a
Ground Fault Circuit Interrupter to supply power to your toot. ALWAYS WEAR
electrfelan's rubber gloves and footwear In damp conditions,
7 INSPECT tool cords for damage. Have damaged toot cords repaired at a Sears
Service Center BE SURE to stay constantly aware of the cord location and keep it
welt away from the moving blade
8 DO NOT abuse tile cord° NEVER Use the cord to carry the toot by or to pull
the plug from the outlet. Keep cord away from heat, oil, sharp edges or moving
parts Replace damaged cords immediately Damaged cords increase the risk of
electric shock
Loading ...
Loading ...
Loading ...