Loading ...
Loading ...
Loading ...
HOWTO USETHE LASER TRAC TM FEATURE (Fig. 11)
I, Mark your workpiece with a pencit line at the point to be cut.
2 SIide the Laser Trac TM switch "On" to activate the "bright red laser line"
3 Align the "red laser line" to touch the right edge of your pencil t{ne on the
workptece
4 Ciamp your workpiece tn place with the
hold down cfamp,
5, Follow a{[ of the cutting instructions for the
type of cut you want to make starting on
page 27,
NOTE: See label located on lower left }
of the saw base above mounting hole,
]
Fig. 11
APPLICATIONS
The blades included wilh this saw are ldeat for a wide vadety of cutting operations on wood
and weed-like products Use your compound miter saw for the purposes IJstedbelow:
= Crosscutting wood and wood base materials,
= Crosscutting plasticsĀ° like PVC, CPVC, ABX, solld surfacing materials and
other plastics
='Crosscutting miter joints for picture frames, moldings, door casings, chair rail,
shoe and baseboards,
e Compound cuts for decorative wood molding, such as chair rai{, cove mofdlng
and picture frames and other fine joinery
This tool is NOT recommended for cutting ferrous metals, such as iron, steel,
stainless steel, or alloys of these metals_ Cut non-ferrous metats ONLY if you are
under the supervision of an experienced person, A{so DO NOT cut stone, brick, or
concrete with this miter saw
WARNING: BEFORE starting any cutting operation, clamp or bolt your
compound miter saw to a work bench or flat stable work surface, NEVER
operate your miter saw on the floor or tn a crouched position, Failure to
heed thts warning could resutt In serious personal Injury,
SUPPORTING LONG
WORKP|ECES (Fig,1 1a) Fig 11a
Long workpieces require extra
supports The supports should be
placed a{ong the workpiece so it
does not sag, The support shoutd
al$ow the workpiece lo lay flat on
the base of the saw and work
table during Ihe cut{lng operation,
Use the hold down clamp to
secure the workplece
Z_ CAUTION: NEVER use another person as an additional support for a
workptece that is longer or wider than the basic saw table, or to help feed,
support, or pull the workp]ece
25
Loading ...
Loading ...
Loading ...