Loading ...
Loading ...
Loading ...
[ _WARNING: BE SURE to read and understand alt instructions In this
manual before ustng the miter sew Failure to foliow all Instructions may
result tn hazardous radiation exposure, electric shock, fire andtor serious
personal Injury.
SAFETY PRECAUTIONS FOR LASERS
This miter saw has a built-in laser Fight.The laser is a Ciass Ilia and emHs output
power of a maximum 2 5mW and 635-665nm wavelenglhs These lasers do nol
normatIy presenl an opttcal hazard However, DO NOT stare at tile beam as this can
cause flash blindness
CAUTiON:The following label Is on your tool
It indicates where the saw emits the inset lighL
BE AWARE of the laser light location when using.
ALWAYS MAKE SURE that any bystanders in the
vlclnlty of use ere made aware of the dangers of
looking directly into the laser,
_VDI_ t:X¥r_._ttflit
z_,WARNING: LASER LIGHT. LASER RADIATION.Avold Direct Eye
Exposure. DO NOT stare Into beam. Only turn laser beam on when the saw
is on the workplece, Class Ilia laser.
/IkWARNING: Use of controls, adjustments or performance of procedures
other than those specified in this manual may result in hazardous radiation
exposure,,
z_WARNING: The use of optical instruments such as, but not limited to,
telescopes or transits to view the laser beam will increase eye hazard,
DO NOT remove or deface any product }abels. Removing product labels
increases the risk of exposure to laser radiatlon.
2 The laser beam can be harmful to the eyes, ALWAYS avoid dtrect eye
exposure DO NOT look dtrecily inlo the laser beam ouIput aperture during
operation. DO NOT project the laser beam directly into the eyes of olhers Turn
laser on ONLY when making cuts
3 The laser on the miter saw is noI a loy ALWAYS keep out of the reach of children
The laser light emllted from this device SHOULD NEVER be direcled Iowards
any person for any reason.
4 BE SURE the laser beam ts aimed at a workpiece (such as wood or rough coated
surfaces) that does not have a refleclive surface
5 DO NOT use on surfaces such as sheet sleel lhat have a shiny, reflective surface
The shiny surface could reflect the beam back at lhe operator Be aware that
laser light refiecled off of a mirror or any oLher reflec!Ive surfaces can also be
dangerous
6 ALWAYS turn lhe laser beam off when not in use Leaving Ihe tool on increases
the risk of someone inadverlen_ly staring Inlo the laser's beam
' _CAUTION: ALWAYS follow only the instructions contained in this
manual when using this laser. Use of this feature in any manner other than
what appears in this manual may result tn a hazardous radiation exposure.
Loading ...
Loading ...
Loading ...