Loading ...
Loading ...
Loading ...
PERSONALSAFETYeont,
8 ALWAYSSECUREYOURWORK° Use clamps or a vise to hold work when
practical It is safer than using your hand and frees both hands to operate tool
g USE SAFETY EQUIPMENT, Always wear eye protection, Dust mask, non-skid
safety shoes, hard hat, or hearing protection must be used for appropriate
conditions
10 NEVER stand on too!, Serious injury could occur if the tool is tipped or tf the
blade is accidentally contacted
TOOL USE AND CARE SAFETY
I _WARNING: SE SURE to read and understand ell Instructions before
operating this saw. Failure to follow all instructions listed below may result
In electric shook, fire and/or serious personal injury,
1. ALWAYS Use clamps or other practical ways to secure and support the
workplace to a stable plat/otto. Holding the work by hand or against your body
is unstable and may lead to loss of control.
2. DO NOT force the tool. Use the correct tool and blade for your application.
The correct loci and blade will do the job better and safer at the rate tor which it
is designed,
3 DO NOT use the tool If switch does not turn tt "On"or "Off"° Any tool that
cannot be controlled with the switch Is dangerous and must be repaired
4 DISCONNECT the plug from the power source before making any
adlustments, changing accessories or storing the tool. Such preventive
safety measures reduce the risk of starling the tool accidentally.
5, NEVER leave the tool running unattended, ALWAYS turn It off° DO NOT
leave until the tool comes to a complete stop.
6 STORE Idle tools out of the reach of children and other untrained persons.
Tools are dangerous tn the hands of untrained users
7 MAINTAIN tools with care. Keep cutting tools sharp and clean. Properly
maintained tools wtth sharp cutting edges are tess likely to bind and are easier
to control
8 CHECK for mlsaftgnment or binding of moving parts, breakage of parts,
and any other condition thai may affect the tool's operation tf damaged, have
the tool serviced before using Many accidents are caused by poorly maintained
lools
g USE ONLY accessories that are recommended for this tool. Accessories that
may be suitable for one tool may become hazardous when used on another tool
10 NEVER cut metals or masonry products with thts tool, This miter saw is designed
for use ONLY on wood and wood-like products
11 KEEP blade guards tn place and In good working order.
Loading ...
Loading ...
Loading ...