Loading ...
Loading ...
Loading ...
SAFETY PRECAUTIONS FOR LASERS conL
7 DO NOT attempt to modify the performance of this laser device in any way This
may result in a dangerous exposure to laser radiation,
8 ALWAYS use only the accessories that are recommended by Sears for use with
th_s product,. Use of accessories that have been designed for use with other laser
tools could result in serious injury,
9 For further information regarding lasers, refer to ANSI-Z136,1 The STANDARD
FOR THE SAFE USE OF LASERS, available from the Laser Institute of Amedca
(407) 380-1553
WORK AREA SAFETY
1. Keep your work area clean and well lit. DO NOT leave tools or wood scraps on
the saw while it is In operation. Cluttered workbenches and dark areas Invite
accidents
2 DO NOT operate power tools in explosive atmospheres, such as In the
presence of flammable liquids, gases, or dust, Power tools create sparks
which may ignite the dust or fumes.
3 ALWAYS keep bystanders, children and visitors away while operating a
power tool. Distractions can cause you to lose control,
4 Make your workshop cht|dpreof with padtocks and master switches Lock tools
away when not in use.
5 MAKE SURE the work area has ample tlghtlng so you can see the work and
that there are no obstructions that will interfere with safe operation BEFORE
using your saw
PERSONAL SAFETY
1 KNOW your power tool., Read the operator's manual caretu#y Learn the saw's
applications and limitations, as welt as the specific potential hazards related to
_his tool
2, STAY ALERT, watch what you are doing and use common sense when operating
a power tool
3 DO NOT use lool while tired or under the influence of drugs, a_cehe/or
medication A momenl of inattention while operating power tools may result in
serious personal injury
4 DRESS properly, DO NOT wear loose clothing or jewelry Pull back long hai_,
Keep your hair. clothing, anrJ gEoves away from moving parts Loose clolh[ng or
long hair can be caught in moving pads Air vents often cover moving parts and
should aise be avoided
5 AVOID accidental starling Be sure switch is in "OFF" posit}on before plugging in
6 REMOVE adjusting keys or blade wrenches before turning the too[ "ON".
A wrench lhat is left attached to a relating part of lhe tool may result in persona!
injury
7 DO NOT overreach. Keep proper footing and balance at ell times. Proper
fooling and balance enables better control of the too__nunexpected situations
Loading ...
Loading ...
Loading ...