Loading ...
Loading ...
Loading ...
AINTENANCE
Oven Door
Oven Light
Important: The oven door on a new range may feel "spongy"
when it is closed. This is normal and will decrease with use.
Oven Window
To protect the oven door window:
1. Do not use abrasive cleaning agents such as steel wool
scouring pads or powdered cleansers as they may scratch
the glass.
2. Do not hit the glass with pots, pans, furniture, toys, or
other objects.
3. Do not close the oven door until the oven racks are in
place.
Scratching, hitting, jarring or stressing the glass may weaken
its structure causing an increased risk of breakage at a later
date.
Leveling Legs
Be sure the range is leveled when installed.
If the range is not level, turn the leveling legs, I _
located at each corner of the range, until range
is level. _,,/J
&_ ANTI I_BRACKET
LEVELING LEG
To Replace Oven Light Bulb:
1. When oven is cool, hold bulb cover in place, then slide wire
retainer off cover. NOTE:Bulb cover will fall if not held in place
while removing wire retainer.
BULB CO VER
2. Removebulb coverand light bulb.
3. Replacewith a 40-wattappli-
ance bulb.
4. Replace bulb cover and se-
cure with wire retainer.
5. Reconnect power to range. Reset clock.
RETAINER
Convenience Outlet
(Canadian models only)
The convenience outlet is located
on the lower left side of the
backguard. Be sure appliance cords
do not rest on or near the surface
element. If the surface element is
turned on, the cord and outlet will
be damaged.
The convenience outlet circuit
breaker may trip if the small
appliance plugged into it exceeds
10 amps. To reset the circuit
breaker, press the switch located
on the lower edge of the
backguard.
CIRCUIT BREAKER
Loading ...
Loading ...
Loading ...