Loading ...
Loading ...
Loading ...
Oonvect (select models)
Convection uses a fan to circulate hot air evenly over, under
and around the food. As a result, foods are evenly cooked
and browned, often in shorter times, at lower temperatures
and with the flexibility of using more than one rack at a time.
Notes:
• The oven control comes from the factory set for Auto
Convect Conversion. When using Convect Bake and
Convect Pastry enter the conventional baking
temperature. The control automatically converts the
temperature to 25° less than the conventional
temperature.
• When using Convect Roast the temperature will not be
automatically reduced. Enter the conventional roasting
temperature and time. The control then lets you know
when 750/0of the time has elapsed and alerts you to
check the food for doneness.
• To turn Auto Convect Conversion off, see page 27.
Convect Options
Cook & Hold and Delay options are available when convect
cooking. See page 15 for information on how to program a
Cook & Hold or Delay option.
Multiple-Rack
Baking of
Cookies/Biscuits
Breads
Casseroles
Tarts/Tortes
Cakes
Whole Chicken
Whole Turkey
Vegetables
Pork Roasts
Beef Roasts
FrozenPie
Turnovers
Cream Puffs
Puff Pastry
Notes-"
• When using Convect Bake and Convect Pastry with the
Auto Convect Conversion option turned off, reduce the
set temperature by 25° F.
• If Convect Roasting with the Auto Convect Conversion
option turned off, you will not be required to program a
cooking time. Check food at 750/0of the conventional
time.
Oonvect Bake (select models)
To set Convect Bake:
1. Press the Convect pad.
2. Select CNVT BAKE using the Quickset pads.
3. Select the oven temperature using the Quickset pads
OR
Enter the desired temperature using the number pads.
Press Enter pad to set.
• The temperature can be set from 195° F to 550° F
degrees in 5° increments when Auto convect is on. If
Auto Convect is off, temperature can be set from 170°.
• After three seconds, the oven will begin to preheat.
CNVT BAKEand PREHEATwill appear in the display
along with 100° or the actual oven temperature,
whichever is higher.
• The temperature in the display will increase in 1°
increments until the oven reaches the preset
temperature. Allow about 15 minutes for the oven
to preheat.
• When the oven is preheated, the oven will beep,
PREHEATwill turn off and CNVT BAKE will be displayed.
AUTO will be displayed if Auto Convect Conversion
feature is turned on.
• Place food in the oven. J............. ,
4. At the end of cooking, turn the oven off by ( CANCEL i
\ /
pressing the CANCEL pad. Remove food
from the oven. The oven will continue operating until the
CANCEL pad is pressed.
Rapid Preheat (selectmodels)
Use to decrease preheating time when using Bake or Convect
Bake. Use for all foods when baking on one rack.
• After Bake or Convect Bake has been programmed and
activated, press the Rapid Preheat pad.
• 1 RACK ONLY will display, after 10 seconds the display will
show RAPID and PREHEAT.
• Preheat time is five minutes.
To return to Standard Preheat:
Press Rapid Preheat pad again. This will provide standard
preheat and PREHEATand the selected function will be
displayed.
Notes:
For best results, use rack position 3 or 4 when using the
Rapid Preheat option.
For optimum baking and browning results, Rapid Preheat
is not recommended when baking on multiple racks.
16
Loading ...
Loading ...
Loading ...