Loading ...
Loading ...
Loading ...
6261
Grinder Motor in
protection mode to
prevent overheating.
No coffee beans in the
Bean Hopper.
Grinder has been used for
long periods in a short
space of time.
Fill the Bean Hopper with
freshly roasted coffee beans.
Hopper Gates are closed
or not fully open.
Turn the Bean Hopper in a
clockwise direction. At Grind
Setting 30, Hopper Gates are
fully open. See Removable
Bean Hopper section,
page13-19.
The Grind Chamber or
Outlet is blocked.
Grind Setting not correct.
Grinder needs cleaning.
See Care & Cleaning,
pages 42-49.
Adjust the Grind Settings
by turning the Bean Hopper.
See Tips for Grinding, &
Extraction, pages 13-19.
Top Burr not seated
correctly.
Top Burr needs cleaning.
Coffee beans or grinds are
caught around & under the
Top Burr.
See Care & Cleaning,
pages 42-49.
Leave the Grinder for
5 minutes.
The GRINDER LIGHT will
illuminate white to indicate
normal use can be resumed.
What To Do
See Adjusting the Bottom
Burr section on, page 13-19.
Bottom Burrs needs
adjusting.
No coffee grinds
coming from the
Grinder Outlet.
Coffee grinds are
coarse when on a
fine Grind Setting.
Grinder Light
illuminated red.
Bean hopper is not installed.
New Burrs are bedding in.
This is normal for the
first few uses.
The machine is not
plugged into the power
outlet.
The Bean Hopper is not
seated correctly & not acti-
vating the red Interlock Pin.
Turn the Bean Hopper in a
clockwise direction to lock
into place.
See Care & Cleaning, page 42-49
Insert in the Power Plug
into power
outlet & switch on.
Install the bean hopper
properly.
Turn the Bean Hopper
clockwise in small increm-
ents to a finer Grind Setting
to keep an optimum
espresso extraction. Use
the information on pages
20-31 to help.
Not enough coffee grinds
used.
Beans are losing freshness.
Dose more coffee grinds.
Grinds not tamped
(compacted) enough.
Tamp more firmly. See
Espresso Extraction Guide
section, page 20-31.
What To Do
Turn the Bean Hopper in a
clockwise direction to a Grind
Setting between 30-0 to fully
open the Hopper Gates.
See Removable Bean
Hopper section, page 13-19.
Hopper Gates are closed
or not fully open.
Grinder Light does
not illuminate after
pressing POWER
Button.
Optimum Grind Setting
is producing an under
extracted espresso.
Grinder Light flashes
when trying to grind
beans.
Grind button light keeps
red fixed.
ProblemPossible Cause
ProblemPossible Cause
15.3 Troubleshooting Guide - Grinder
15. Troubleshooting Guide15. Troubleshooting Guide
Loading ...
Loading ...
Loading ...