Loading ...
Loading ...
Loading ...
- Ensure the Hopper Guide is aligned
with the vertical red tines on the
Hopper base.
- Align & insert the Bean hopper into
the Grinder Collar and firmly pushing
down turn clockwise to lock into
place and open the Hopper Guide.
• Cleaning Top Burr
- Fold the one handle up and lift the
Top Burr from the Grinder Collar.
- Wash the Top Burr in warm soapy
water with a mild detergent, rinse
& dry.
• Cleaning & Unblocking Bottom
Burr and Grind Chamber
- Use the Cleaning Brush or a Vacuum
Cleaner to thoroughly clean the
parts and surfaces in the Grind
Chamber of fine coffee grinds. A
damp cloth can be used to wipe the
inside of the Grind Collar.
• Replace Top Burr
How to take out the Top Burr:
- Rotate the Grinder Collar countercl-
ockwise.
How to reseat the Top Burr:
- Use the one handle to put the Top
Burr into the Grinder Collar.
- Use the one handle to take out the
Top Burr seated in the Grinder Collar.
- Remove the Portafilter and dispose
of the waste grinds as these will be
too coarse for espresso coffee.
- Remove the Bean hopper from the
Grinder Collar and store any remaining
coffee beans in an airtight container to
preserve their freshness.
4847
Spots & marks on the surface of the
Burrs are part of the hardening
process (for extra-long life). These
marks do not affect the performance
of the Grinder or the taste of the
espresso.
NOTE
Care should be taken when cleaning
Grinder Burrs as they are sharp.
CAUTION
• Grind Off Excess Coffee Beans
- The machine is on and in the READY
state.
- Make note of the current Grind Setting
(to use as the starting point after
cleaning).
- Insert Double-cup filter into the
Portafilter.
- Insert Portafilter into Portafilter
support.
• 1-2 Months
- If the Grinder is used frequently (
everyday), the Burrs need to be
cleaned to ensure best performance
of the integrated Grinder. Regular
cleaning helps the Burrs achieve
consistent grinding results, which
Cleaning & Unblocking Grinder
Burrs, Collar, Grind Chamber
And Outlet
- Reset to the Grind Setting noted
prior to cleaning.
• Preparing to Clean
- Turn off the machine, switch off &
unplug at power outlet.
Do not pour water or any other
liquid into the Grind Chamber.
CAUTION
Coffee grinds caught under the Top
Burr may prevent the Bean hopper
from seating correctly. If this happens
grind off excess coffee beans.
NOTE
is especially important when grinding
coffee beans for espresso.
• Replace Bean hopper
- Ensure the Grinder Collar is clean,
without residual of coffee beans or
grinds.
- Allow thorough air drying.
13. Care & Cleaning - Grinder13. Care & Cleaning - Grinder
Loading ...
Loading ...
Loading ...