Loading ...
Loading ...
Loading ...
2625
2. Access Extraction Temperature
Custom Mode
- Press the Program button for
minimum 2 seconds , there will be
a beep.
If no buttons are pressed within 1
minute of entering a custom mode,
the machine will exit and go back
to the READY state.
IMPORTANT
bitterness and increase acidity.
1. Check Power
Ensure that:
- The Power Plug is inserted into the
outlet & switched on.
- The DIAL is in the vertical position.
- The machine is on and in the
READY state.
3. Adjusting Extraction Temperature
The default setting is:
92°C(197.6℉) = Double-shot indicator
illuminated.
4. Confirm Extraction Pre-infusion
Profile
- Press the Program button to save
your selection. The machine will
beep & exit the custom mode.
- The machine will return to the
READY state.
- Constant = Press the brew button 3
times, The Manual-shot indicator
illuminated.
6.3 Operation
1. Check Water
MAX 2.8L
Fill water into the water tank NOT
exceed the MAX line. Set up the
water tank vertically and align
the bucklesto the hole on the
back of themachine,and press
it down to beparallel to the top
of the machine.
4. Confirm Extraction Temperature
- Press the Program button to save
your selection. The machine will
beep & exit the custom mode.
- The machine will return to the
READY state.
7. Customisable -
Extraction Pre-infusion Profile
1. You can select from three Pre-
infusion Profiles to cater for personal
preferences.
- Gentle Pre-infusion: Small defined
amounts of water are introduced into
the tamped coffee grinds, gently
adding moisture to bloom the coffee
grinds in preparation for a steady
water flow. For a balanced tasting
espresso. This is the default profile
setting.
- Distinct Pre-infusion: A single distinct
To adjust extraction temperature press:
95°C(203℉) = Manual-shot indicator
illuminated.
89°C(192.2℉) = Single-shot indicator
illuminated.
dose of water is released into the
tamped coffee grinds, followed by a
brief rest period, then a steady water
flow.For a more bright tasting espresso.
- Constant Pre-infusion: Delivers a
constant, steady water flow from
start to finish. For a more sharp
tasting espresso.
2. Access Pre-infusion Custom Mode
- The machine is ON and in the READY
state.
- Simultaneously press & hold the
Brew button and Program button for
2 seconds. The machine will beep.
3. Selecting Pre-infusion Profiles
The default setting is:
Gentle = the Single-shot indicator is
illuminated.
To select a Pre-infusion Profile
- Distinct = Press the brew button 2
times, Double-shot indicator will
illuminate.
6. Espresso Guide6. Espresso Guide
Loading ...
Loading ...
Loading ...