Loading ...
Loading ...
Loading ...
Cleaning Steam Wand
• Every Time
- After frothing milk, purge the Steam
Wand by turning the STEAM/HOT
WATER dial to Steam for just 3-4
seconds..
- Wipe the Steam Wand with a damp
cloth.
• Weekly
Clean in warm water with a mild
detergent, rinse & dry.
Cleaning Portafilter & Filter Basket
• Every Time
Wash after each use by rinsing them
with warm water under the tap.
• Regular Intervals
In warm soapy water using a mild
detergent, rinse & dry.
Cleaning Shower & Group Head
• Every Time
Run water through before making an
espresso.
• Weekly
- Purge water through the Group Head
by using the Double-cup filter.
- Allow water to run through until it
stops.
- With the Cleaning Brush remove
any coffee grinds from around the
Group Head inside rim and Silicone
Seal. Wipe the Shower Head with a
damp cloth.
Cleaning Cycle Procedure
• Preparing for Cleaning Cycle
- Ensure there is at least 1 Litre of water
• Cleaning Cycle Complete
- After it flows out 150ml-200ml of
water to Clean the machine, press
the Brew button to stop.
- Press the Power button to exit
function.The machine will return
to the READY state.
- Remove the Portafilter from the
Group Head. Check whether the
descaler has been dissolved.
- Water will purge into the Drip Tray.
• Cleaning Cycle Clean Up
- Purge the Group Head by pressing
Brew button 3 times, then the Manual
dose indicator will keep white light fixed.
- Long press Brew button to start and
water should flow.
- Allow water to run through and press
the Brew button to stop.
- Wash the Drip Tray, Portafilter &
Cleaning Disc in warm water with a
mild detergent, rinse & dry.
• Group Head Silicone Seal
A silicone seal is located in the Group
Head and creates a seal against the
Filter Basket when making an espresso.
Over time this Seal loses its elasticity
and may require replacement. The
seal may need replacing when watery
espresso leaks from around the porta-
filter handle during extraction, or if the
portafilter handle is loose when fully
turned to the centre position.
4443
If the descaler has not been dissolved,
insert the Portafilter back into the
Group Head, empty the Drip Tray.
Repeat the Cleaning Cycle section.
NOTE
When the machine is not being
used, we recommend that you
don’t leave the Portafilter inserted
into the Group Head, as this will
reduce the life of the silicone seal.
IMPORTANT
Contact Gevi should you think
that the Group Head seal needs
replacing. Do not attempt to change
the Silicone Seal without first consu-
lting Gevi.
NOTE
- Empty the Drip Tray.
- The machine is on and in the READY
state.
- Place the Double-cup filter & the
Cleaning Disc into the Portafilter.
- Place one espresso machine cleaning
descaler in the middle of the Cleaning
Disc in the space provided.
- Insert Portafilter into the Group Head.
- Start the Cleaning Cycle Procedure.
- Press Brew button three times.
- Long press Brew button to start. The
machine will have a beep & water
should start flowing from the Group
Head.
12. Care & Cleaning - Espresso Machine12. Care & Cleaning - Espresso Machine
Loading ...
Loading ...
Loading ...