Loading ...
Loading ...
Loading ...
• Check Power
Ensure that：
- The Power Plug is inserted into the
outlet & switched on.
- the STEAM/HOT WATER dial is in the
vertical position.
- The Clean indicator blinks white
light slowly.
• Activate the Descaling Cycle
- Simultaneously press & hold the
Grind button and Brew button for 2
seconds. The Clean indicator keeps
white light fixed.
Step 2. Preparing for Purge
Step 1. Start Descaling Cycle
- Turn the STEAM/HOT WATER dial to
the STEAM position.
- The Steam/Hot water indicator will
now start to flash.
- The Pump will start and hot water
will run from the Group Head & Steam
Wand. Over a 2 minute period the
Pump will make different noises.
- When hot water has stopped being
released from the Group Head & Steam
Wand , to indicate the machine has
finished this step, the machine will
beep. The Steam/Hot water indicator
will now start to flash.
- Turn the STEAM/HOT WATER dial to
the vertical position.
- The Steam/Hot water indicator will
now be fully illuminated.
- Move to Step 2. Preparing for Purge.
- The Steam Wand & Group Head now
need to be purged clean with fresh
water to remove descaling solution.
Rinse Water Reservoir.
- Remove the Water Reservoir and
rinse thoroughly under running
water, ensuring that all traces of the
descaling solution have been removed.
Fill Water Reservoir
- Fill the Water Reservoir to the '1
Liter' line with cold water from the
tap and insert into position.
Empty Containers
- Empty water from the containers
and replace.
- Move to Step 3.Start Purge.
Step 3. Start Purge
- Turn the STEAM/HOT WATER dial
to the Hot Water position.
- The Pump will start and hot water
will run from the Steam Wand. Over
a 2 minute period the Pump will
make different noises.
- When hot water has stopped being
released from the Steam Wand, the
Descaling Cycle is completed.
• Descaling Cycle Complete
- To indicate the completion of the
Descaling Cycle the machine will
beep.
- The Steam/Hot water indicator will
flash to prompt the return of the STEAM
/HOT WATER dial to the vertical position.
- Turn the STEAM/HOT WATER dial to
the vertical position.
- The machine will return to the READY
state.
• Descaling Cycle Clean Up
- Empty water from the containers
and clean, ensuring that all traces
of the descaling solution have been
removed.
5251
If Descaling Step 1 is not started
within 1 minute to enter the
Descaling Cycle, the machine will
exit the Descaling Cycle and go
back to the READY state.
IMPORTANT
There is a maximum of 5 minutes
allowed to complete this step
before the Descaling Cycle exits.
IMPORTANT
The Descaling Cycle can be exited
at any point by pressing the Power
button.
IMPORTANT
• Place Containers
- Place a 1 Litre container under Group
Head and another 4 cup container
under the Steam Wand.
14. Descaling Cycle - Espresso Machine14. Descaling Cycle - Espresso Machine
Loading ...
Loading ...
Loading ...