Loading ...
Loading ...
Loading ...
AUXILIARY FENCE/WORK SUPPORT
Make one using a piece of 3/8 inch and 3/4 inch plywood.
Fasten together with glue and flat head woodscrews.
Tighten the screws sa the flat head is even with the
bottom of the wood.
3-1/2 _
3/4 PLYWOOD
/
A
27
THIS FACE AND THIS 30
EDGE MUST BE PARALLEL
3/8 pLYWOOD
AUXILIARY FENCE/WORK SUPPORT
AUXILIARY PANEL WORK SUPPORT
Make using a piece of 3!4" and 3/8" plywood. Fasten
together with glue and wood screws. Use this auxiliary
panel work support only when cutting large panels that
require the rip fence to be positioned past the exposed
side of the extension,
3-5/8
3/4 PL YWOOD
26-I/2
:-3/8
FACE & EDGE
MUST BE "" . ....-.,,.
PARALLEL
/
318 PLYWOOD 2
NOTE: All dimension m inches
AUXILIARY PANEL/WORK SUPPORT
SAFETY iNSTRUCTIONS FOR BASIC SAW OPERATIONS
BEFORE EACH USE:
1. Inspect your saw.
a. Toavoid injuryfrom accidental starting, unplug
the saw, turn the switch off and remove the
switch key before raising or removing the
guard, changing the cutting tool. changing
the setup or adjusting anything.
b. Check for alignment of moving parts, binding
of moving parts, breakage of parts, mounting,
and any other conditions that may affect the
way it works. If any part is missing, bent. or
broken in any way, or any electrical parts don't
work properly, turn the saw off and unplug the
saw,
c. Replace damaged, missing, or failed parts
before using the saw aga i n.
d. Use the sawblade guard, spreader, and anti-
kickback pawtsfor any thru-sawing (whenever
the blade comes through the top of the work-
piece). Make sure the pawls work properly.
Make sure the spreader is in line with the
sawblade.
REMOVE ADJUSTING KEYS AND
WRENCHES. Form habit of checking for and
removing keys and adjusting wrenches from
tool before turning Et on,
To avoid injury from jams. slips or thrown
pieces (kickback and throwback):
1_USE ONLY RECOMMENDED ACCES-
SORIES (See page 58) - Follow the
instructions that come with the accessories,
Using other accessories may be dangerous.
2. Choose the right blade or cutting accessory
for the material and the type of cutting you
plan to do.
3. Never use grindm g wheels, abrasive cut-off
wheels, friction wheels Lmetal slitting blades)
wire wheels or buffing wheel. They can fly
apart explosively.
4O
Loading ...
Loading ...
Loading ...