Loading ...
Loading ...
Loading ...
IMPORTANTSAFETY
INSTRUCTIONS
Anti-Tip Bracket (contd.)
Step 2
Anti-tip bracket installation
A. Wood Construction:
lJ
Floor: Drill a Vd' pilot hole in
the center of each pre-marked
wood floor hole position (a nail
or awl may be used if a drill is
not available),
AND
2_
Wall; Drill an angled 1/8"pilot
hole (as shown in Fig. 2) in the
center of each pre-marked
wall hole position (a nail or awl
may be used if a drill is not
available)r
ATTACHMENT TO WALL AND FLOOR
Bracket XI
i ScrewMust_
Enter Wood Ill
&.., o
.,\\\\\\\i_\'_\\x\\\\\\\\_
Fig. 2
Wall
Plate
B. Mount the ANTI-TIP bracket
with the 4 screws provided as
illustrated in Fig. 2
C. Concrete Construction:
Hardware required:
4 each W'x 1W' lag bolt
4 each 1W'O D sleeve
anchor
. Drill the recommended size
hole for the anchors into the
concrete at the center of each
pre-marked concrete floor and
wall hole position Install the
sleeve anchor into the drilled
holes and then install the lag
bolts through the bracket
DO NOT OVERTtGHTEN THE
BOLTS.
Step 3
Checking the installation
A. Complete the installation of
the range per the installation
instructions provided with it
B. Check if the ANTI-TIP bracket is
installed and engaged properly
Remove the kick panel or storage
drawer and inspect the REAR
LEVELING LEG Make sure it fits
securely into the sloL See Fig. 1
4
Loading ...
Loading ...
Loading ...