Loading ...
Loading ...
Loading ...
CAREANDCLEANING
Self-CleaningCycle (cont.)
The Clean Cycle, including cooldown
time, is automatically set for 4 hours
30 minutes and automatically turns off
after the set time, but you may
change this from 3 hours if oven is
lightly soiled, up to 5 hours if oven is
heavily soiled
1. Touch the CLEAN pad.
4 hours 30 minutes wil!
show in the display.
(_ 2,
@
If you want to change
the length of clean time
touch the HOUR/MIN
UP or DOWN arrow
pads,
Touch the
START pad,
The door locks automatically. The
display will show the clean time
remaining. It will not be possible to
open the oven door until the
temperature drops below the lock
temperature and the LOCKED DOOR
light goes off.
When the LOCKED DOOR light is off,
open the door.
The words LOCK DOOR will flash and
the oven control will signal if you set
the clean cycle and forget to close
the oven door.
Touch the CLEAR/OFF pad, You wilt
need to wait for the oven temperature
to drop below the lock temperature
(approx, 1 hour) before attempting to
open the door,
After the cycle, you may notice some
white ash in the oven Just wipe it up
with a damp cloth or sponge.
If white spots remain, scrub them
with a soap-fitted steel-wool pad. Be
sure to rinse thoroughly. These are
usually deposits of salt that cannot
be removed during the cycle°
If for any reason you are not
satisfied with the cleaning results,
just repeat the cycle.
Make sure the
@ "
@
clock is set correctly.
Touch the
CLEAN pad.
If you want to change
the length of clean time
touch the HOUR/M1N
UP or DOWN arrow
pads
Touch the DELAY
START TIME pad.
Touch the HOUR/MIN
UP or DOWN arrow
pads to set the time
you prefer the clean
cycle to start,
[_ 5. Touch the
START pad
3O
Loading ...
Loading ...
Loading ...