Loading ...
Loading ...
Loading ...
CAREANDCLEANING
RemovableParts (cont.)
CLEANING MATERIALS
* Dishwashing detergent
o Warm water
o Scouring pad or soap-filled
steel-wool pad
Bump in i_
Rack Guide ..t_
Raised Back
of the Rack
TO REMOVE
1. Pull the racks out to the stop
position.
2. Pull up the front of the rack and
slide under the bump of the rack
guide.
TO CLEAN
Clean with warm water and detergenL
For hard-to-remove stains, gently
scrub with a scouring pad or a
soap-filled steel-wool pad, Rinse well.
TO REMOVE
1. Fully open the
door.
2. Push the hinge
locks down
toward the door
frame, to the
unlocked Slot
position,
This may
require a
flat=blade
screwdriver.
.
Hinge Lock
(Unlocked
Position)
w
Sl
Hinge Arm
Firmly grasp both
sides of the door
at the top
Close door to the ' _:
i
door removal .....
position°
Lift door up until
the hinge arm is (:
clear of the slot,
Removal Position
TO REPLACE
TO REPLACE 1.
1. Place the raised back of the rack
onto the rack guides
2. Lift the front of the rack until the 2.
raised back slides under the bump
of the rack guides.
3. Slide the rack all the way back.
Firmly grasp both Bottom Hinge
sides of the door Edge of Arm
Slot
at the top. \ ,//
With the door at
the same angle
as the removal t\_i,_lJ,
position, seat the
indentation of the
hinge arm into
the bottom edge
of the hinge slot. Indentation
34
Loading ...
Loading ...
Loading ...