Yamaha RX-V1400 receiver

User Manual - Page 84

For RX-V1400.

PDF File Manual, 92 pages, Download pdf file

Loading ...
Loading ...
Loading ...
_ _00N RX-VI40(IU EN.book Page 8(I Thursday, July 10, 20(13
12:17 AM
[Igl$111=tltlt.'fglelSJlll[
Refer to
Problem Cause Remedy
page
There is noise This unit is too close to the digital or high- Move this unit fresher away tbom such equipment. ..._
interference from frequency equipment.
digital or high-
frequency equipment,
or this unit.
The picture is The video source uses scrambled or Playing back video sol,ware that has an anti-copy ........
disturbed, encoded signals to preven_ dubbing, signal or video signals with a lot of noise rrmy
produce unstable images.
There is noise when The OSD may be disturbed when Select OFF in CMPNT OSD. 56
the OSD is displayed, displaying OSD tbrough component video
connections.
This unit suddenly The internal temperature becomes too Wait until this unit cools down and tben turn it back ........
turns into the standby high and the overbear protection circuitry on.
mode. ha._ been aclivated.
Tuner
Refer
Problem Cause Remedy to page
FM stereo reception is 21
noisy.
+
There is distortion, and
clear reception cannot
be obtained even with a
FM good FM antenna.
The desired station
cannot be tuned in with
the automatic tuning
method.
The characteristics of FM stereo
broadcasts may cause this problem
when the transinitter is too far away or
the antenna input is poor.
The desired station
cannot be tuned in with
the automatic tuning
method.
Check the antenna connections.
Try using a high-quality directional FM
antenna.
Use the manu_l tuning method. 36
There is multipath interference. Adjust the antenna position to eliminate ........
mulflp_th in_ert?rence.
The station is too weak. Use a high-quality directional FM antenna. 21
Use the manual tuning method. 36
Previously preset This unit has been disconnected ti)r a Preset the stations again. 37
stations can no longer long period.
be tuned in.
The signal is weak o1"tile antenna Tighten the AM loop antenna connections ....
connections are loose, and orien_ it _i)r best reception.
Use the manu_l tuning method. 36
A There are continuous Noises result from lightning, Use an outdoor antenna and a ground wire. ..._
crackling and hissing fluorescent lamps, motors, therinostats This will help somewhat, but it is diffficult to
M noiseS, and other electrical equipment, eliminate al! noise.
There are buzzing and A TV set is being used nearby. Move this unit away from the TV. ..._
whining noises
(especially in the
evening).
+
8O
Loading ...
Loading ...
Loading ...