Loading ...
Loading ...
Loading ...
_ @00 RX-VI4OllU EN.book Page 48 Thursday, July 10, 2003
12:17 AM
€'/,_Jt '/I,_L
Option menu
Use to adjust the oplional syslem settings.
Item Features Page
D _[SPLI)Y SET Adjusts the OSD and converts video signals. 56
MEMORY GUARD Locks sound field program parameters and other SET MENU settings. 56
PAP.A[']. _[N I Initializes the parametersof a group of sound field programs. 57
SP _[MP. SET Selects tile impedance of your speakers. 57
ZONE SET Specifies the location of the speakers connected to the SPEAKERS B terxninals. 57
_'.ONE2 SET Selects the Zone 2 mode. 57
ZONE3 SET Selects the Zone 3 mode. 58
+
Use the remote control to access and adjust each
parameter.
-1
2,3,4-
5-
-2,3,5
1 Press AMP to select the AMP
mode.
2 Press A / v to select AUTO SETUP or
MANUAL SETUP, then press < / > to enter the
selected category.
then
3 Press A / v repeatedly to select a menu,
then press < / > to enter the menu item.
Repeat this operadon 1o navigate to and enler the
selup mode of Ihe item you want to adjust.
4 Press ( / > repeatedly to change the setting of
the item you want to adjust.
5 To exit, press A / v repeatedly until the
menu disappears or just press one of the
sound field program group buttons.
or
Memory back-up
The memory back-up circuit prevents the slored dala
from being lost even if this unit is in the standby mode.
However, if the power cord is disconnected from the
AC outlet, or the power supply is cut for more than one
week, the slored dala will be lost. If so, adjust the
items again.
+
5g! i E;i'!_J
e ,_UTG SETLIP
•FI_ItLI_L.SETUP
If/x is pressed when AUTO SETUP is selected, or if v is
pressed when MANUAL SETUP is selected, SET MENU
wil! be closed. Press/x / v to open SET MENU again.
48
Loading ...
Loading ...
Loading ...