Loading ...
Loading ...
Loading ...
_ @0(! RX-VI400U EN.book Page 15 Thursday, July 10, 20(13
12:17 AM
+
Do not connect this unit or other components to the mains
power until all connections between components are
complete.
• Signal directions and cable indications
audio signal direction I1_
video signal direction
For analog signals
left analog cables
right analog cables
For digital signals
oplical cables
coaxialcahles
For video signals
videocables
S-video cables
• Analog jacks
You can input analog signals from audio components by
connecting audio pin cable to the anMog jacks on this unit.
Connect red plugs Io the right jacks and white plugs to the
left jacks.
• Digital jacks
This unit has digital jacks for direct lransmission of digital
signals through either coaxial or fiber oplic cables. You
can use the digital jacks m input PCM, Dolby Digital and
DTS bitstreams. When you connect components to bolh
the COAXIAL and OPTICAL jacks, priority is given to
the input signals from the COAXIAL jack, All digital
input jacks are compatible with 96-kHz sampling digital
signals.
Dust protection cap
Pull out the cap from the optical jack before you connect
the fiber oplic cable. Do not discard the cap. When you are
not using the optical jack, be sure m put the cap back in
place. This cap protects the jack from dust.
• Video jacks
This unit has lhree types of video jacks. Connection
depends on the availability of input jacks on your monitor.
The signals input through the VIDEO jack on this unit can
be output through the S VIDEO and COMPONENT
VIDEO jacks (see page 56). The signals input through the
S VIDEO jack can be oulput through the VIDEO jack
when V CONV. is set to ON (see page 56).
C_PONE_VI_O
®.......@ 00o
VIDEO jack
For conventional composite video signals.
S VIDEO jack
For S=video signals, separated into luminance (Y) and
color ((2) video signals to achieve high-quality color
reproduction.
COMPONENT VIDEO jacks
For component signals, separated into luminance (Y) and
color difference (P_, Pt0 Io provide the best quality in
picture reproduction.
When signals are input through both the S VIDEO and VIDEO
jacks, signals input through the S VIDEO jack has priority.
+
This unit handles digital and analog signals independently. Thus
audio signals input to the analog jacks are only output to the
analog OUT (REC) jacks. Likewise audio signals input m the
digital (OPTICAL or COAXIAL) jacks are only output to the
DIGITAL OUTPUT jacks.
¢
15
Loading ...
Loading ...
Loading ...