Loading ...
Loading ...
Loading ...
_ _00N RX-VI400U EN.book Page 79 Thursday, July 10, 20(13
12:17 AM
tilOlllgta_t."lgIOZOJlll_*I
+
Problem
Dolby Digital or DTS
sources cannot be
played. (Dolby Digital
or DTS indicator on
the front panel
display does not light
up.)
A "humming" sound
can be heard.
The volume level is
low while playing a
record.
The volume level
cannot be increased,
or the sound is
distorted.
The sound effect
cannot be recorded.
A source cannot be
recorded by a digital
recording component
connected to this
DIGITAL OUTPUT
jack.
Cause Remedy
Tile connected component is not set to
output Dolby Digital or DTS digital
signals.
INPUT MODE is set Io ANALOG.
Make an appropriate setting tbllowing the operations
instructions for your component.
Set INPUT MODE to AUTO or DTS.
Incorrect cable connections.
Firmly connect the audio plugs. If the problem
persists, the cables may be dethctive.
No connection from the turntable to 1be
GND terminal.
Connect the grounding cord of your turnable to the
GND terminal of this unit.
The record is being played on a turntable Tile turntable should be connected Io this unit through
with an MC car{ridge, an MC-head amplifier.
Tile comprment connected to the OUT
(REC) jacks of this unit is turned off.
Turn on the power _o the component.
I{ is not possible to record the sound efthct
with a recording component
Refer to
page
34
19
19
I(>---19
Tile source component is not connected Io Connect the source component to the DIGITAL
this unit's DIGITAL INPUT jacks. INPUT jacks.
Some components cannot record the
Dolby Digital or DTS sources.
A source cannot be Tile source component is not connecled Io Connect the source component to the analog AUDIO 16---19
recorded by an this unit's analog AUDIO OUT jacks. IN jacks.
analog component
connected to the
AUDIO OUT jacks.
The sound field "MEMORY GUARD" in the SET MENU Select OFF. 56
parameters and some is set to ON.
other settings on this
unit cannot be
changed.
This unit does not Tile internal microcomputer has been Disconnect the AC power cord from the outlet and ....
operate properly, frozen by an external electric shock (such then plug it in again al_er about 31) seconds.
as lightning or excessive static electricity)
or by a power supply with low voltage.
"CHECK SP WIRES" Speaker cables are short circuited. Make sure all speaker cables are connected COlTec_ly. ] 2
appears on the front
panel display,
+
Loading ...
Loading ...
Loading ...