Loading ...
Loading ...
Loading ...
Instrument operation
82
Operating the boat with a minimal
wake (no-wake mode)
The no-wake mode is useful for operating the
boat at a steady speed with a minimal wake.
This is especially convenient when traveling
in harbors, channels, or other areas posted
with low speed limits as “no wake zones”.
The no-wake mode can be used only when
the engines are operating at idle speed.
To activate the no-wake mode:
(1) Put the remote control levers in the TDE
position or forward position so that both
engines are operating at idle speed.
(2) Push the “CRUISE/NO WAKE” (+) but-
ton. When the no-wake mode is activat-
ed, “NO WAKE” will be displayed under
“MPH” or “KM/h” for the boat speed.
1 “NO WAKE”
TIP:
The no-wake mode can be set to 3 engine
speeds. To adjust the engine speed while the
no-wake mode is activated, push the
“CRUISE/NO WAKE” (+) button or
“CRUISE/NO WAKE” (–) button.
To deactivate the no-wake mode:
Perform one of the following operations.
● Push the “CRUISE/NO WAKE” (–) button
repeatedly until “NO WAKE” disappears.
● Push the remote control levers forward to
open the throttle.
Operating the boat in reverse with
more thrust (reverse RPM control)
Engine speed in reverse is limited to approxi-
mately 4500 rpm. If more thrust is required
when the boat is traveling in reverse, use the
reverse RPM control. WARNING! Be pre-
pared to reduce throttle as soon as the
boat moves as desired. Otherwise, the
boat may become unstable, which could
result in loss of control and an accident.
To activate the reverse RPM control:
(1) Move the remote control levers backward
so that the throttle is opened in reverse
and both engines are operating at the
same engine speed.
(2) Increase the engine speed to 4500 rpm,
and then push the “CRUISE/NO WAKE”
(+) button.
TIP:
Once the reverse RPM control is activated,
pushing the “CRUISE/NO WAKE” (+) button
will increase the available engine speed by
approximately 500 rpm in 3 stages up to a
maximum of 6000 rpm, and pushing the
“CRUISE/NO WAKE” (–) button will decrease
the available engine speed. However, the ad-
justment is limited to these 3 increments.
To deactivate the reverse RPM control:
Operate the remote control levers to decrease
the engine speed to less than 4500 rpm.
NavAnc
BLWRBILGE BALLCTY LT
SYS
12.3 V
25
FUEL
% 22 ft
AUX
13.2 V
RPM
1300
RPM
1300
MPH
5
DEPTH
H
O
M
E
360
N
EW
NENW
02:18 PM
LAT
LONG
ELEV
00˚00’00”N
00˚00’00”E
0 FT
No Wake
1
SportsBoat_F3R10.book Page 82 Monday, June 27, 2016 3:22 PM
Loading ...
Loading ...
Loading ...