Loading ...
Loading ...
Loading ...
Operation and handling requirements
121
Draining the bilge water from the hull
Remove the hull drain plug at the stern to
drain the water. Check the condition of the
O-ring on the hull drain plug, and then secure-
ly install the drain plug.
1 Hull drain plug
Draining the bilge water on water
This model is equipped with a self-draining
deck and bilge pump to drain the bilge water
on water.
Self-draining deck
Most water which enters the deck area drains
automatically out the stern through the large
drain hole in the deck.
A one-way check valve in the drain prevents
water from traveling back to the deck while
the boat is moored or moving in reverse.
Bilge pump (AR210 / SX210)
Your boat is equipped with a drainage system
that channels water that enters the boat from
the storage compartments to the bilge under
the engine compartment. When the bilge
pump switch is turned on, the bilge pump will
detect when there is excessive water in the
bilge and will automatically drain most of it
through the bilge pump outlet. For normal op-
eration, turn the bilge pump switch on during
boat use and turn it off when leaving the boat.
NOTICE: If the boat is to be left in the water
after use, leave the bilge pump switch and
the battery switch in the on position. The
pump will activate if needed to drain any
water accumulating in the bilge.
1
SportsBoat_F3R10.book Page 121 Monday, June 27, 2016 3:22 PM
Loading ...
Loading ...
Loading ...