Loading ...
Loading ...
Loading ...
Instrument operation
79
To reduce the water depth setting, drag the
slider to the left.
To increase the water depth setting, drag the
slider to the right.
TIP:
To deactivate the water depth alarm, set the
alarm to 0 ft.
Resetting the settings to the default
settings
Tap the “ ” reset button to reset the
settings to their factory default settings. The
automatic bilge mode and automatic blower
mode will be turned on. When the settings are
reset, the button will be shown in red.
1 “RESET” button
The default settings are as follows:
● Depth alarm: 4 ft
● Day mode brightness: 100%
● Night mode brightness: 50%
● Time shift: GMT+0
● Unit: US SYSTEM
● Automatic bilge mode: ON
● Automatic blower mode: ON
TIP:
When setting the water depth alarm 0 ft, the
alarm will not activate.
Setting the time
Tap the “ ” button to set the time. Tap the
time unit that you want to set and flick up or
down.
1 Hours
2 Ten minutes
3 Minutes
4 AM/PM
TIP:
The default setting is GMT +0.
Selecting the display units
Tap the “ ” button to select “US SYS-
TEM” or “METRIC SYSTEM” for the display
units.
When “US SYSTEM” is selected as the dis-
play units of the multi-function display unit,
values are shown in feet/miles/gallons/de-
grees Fahrenheit.
When “METRIC SYSTEM” is selected as the
display units of the multi-function display unit,
values are shown in meters/kilometers/li-
ters/degrees Celsius.
Factory
0
VOLUME
% 0 ft
SYS
12.3V
AUX
12.3V
FLOAT MODE
DEPTH
SETTING
S
Day/Night
Factory
Depth
Time
Unit
Reset all
parameters to
factory settings ?
RESET
1
Time
0
VOLUME
% 0 ft
SYS
12.3V
AUX
12.3V
FLOAT MODE
DEPTH
SETTING
S
Day/Night
Factory
Depth
Time
Unit
Set time
01
am
0 7:
03 2 9:
02
pm
1 8:
1 2 3 4
Unit
SportsBoat_F3R10.book Page 79 Monday, June 27, 2016 3:22 PM
Loading ...
Loading ...
Loading ...