User Manual - Page 126

For AR210 2017 LBT1050A.

Loading ...
Loading ...
Loading ...
Operation and handling requirements
118
1 Dipstick
2 Maximum level mark
3 Minimum level mark
(8) If the engine oil level is significantly above
the maximum level mark, consult a
Yamaha Boat dealer. If the engine oil lev-
el is below the minimum level mark, slow-
ly add engine oil.
(9) Repeat steps (6)–(8) until the engine oil is
at the proper level.
(10) Securely install the oil tank filler cap and
turn it until it stops.
(11) Repeat the checking oil level procedure
for the other engine.
(12) Close the engine hood.
Checking the engine oil
(212X / 212 Limited S / 212 Limited)
WARNING
Engine oil is extremely hot immediately af-
ter the engines are turned off. Coming in
contact with or getting any engine oil on
your clothes could result in burns.
NOTICE
Make sure debris and water do not enter
the oil filler hole. Debris and water in the
engine oil can cause serious engine dam-
age.
To check the engine oil level:
(1) Place the boat in a precisely level position
on land with the engine stopped. If the en-
gine was running, allow the engine oil to
settle by waiting 5 minutes or more be-
fore checking the oil level.
(2) Open the engine hood. (See page 92.)
(3) Remove the dipstick and wipe it clean.
3-star models
1 Dipstick
4-star models
1 Dipstick
(4) Insert the dipstick back into the dipstick
tube completely. Remove the dipstick
again and check that the engine oil level
is between the minimum level mark and
maximum level mark.
FL
21 3
1
1
SportsBoat_F3R10.book Page 118 Monday, June 27, 2016 3:22 PM
Loading ...
Loading ...
Loading ...