Loading ...
Loading ...
Loading ...
Care and storage
162
1 Positive (+) battery lead (red)
2 Negative (–) battery lead (black)
3 Battery strap
4 Ground lead (black)
5 Positive (+) amplifier lead (red) (212X)
6 Negative (–) amplifier lead (black) (212X)
To store the battery:
(1) Clean the battery casing and terminals
using a mixture of baking soda and water
(one tablespoon of baking soda to one
cup of water).
(2) Apply dielectric grease or petroleum jelly
to the battery terminals and to all ex-
posed connectors.
(3) If the battery will be stored for a longer
period, check its state of charge (use a
hydrometer or a voltmeter and load tes-
ter) at least once a month and recharge
the battery if it gets too low.
To charge the battery:
(1) Remove the caps from the cells. Add dis-
tilled water if necessary to top up the
electrolyte to the proper level.
(2) Follow the battery manufacturer’s instruc-
tions for charging. WARNING! When
charging a battery, keep it well away
from sparks and open flames, as it
gives off explosive gases. When using
a battery charger, connect the battery
to the charger before you turn on the
charger. This will prevent sparking at
the terminals that could ignite battery
gases.
To install the battery:
(1) Place the battery in the battery holder,
and then fasten the battery using the bat-
tery strap.
(2) Connect the positive (+) amplifier lead
(red) (212X) and the positive (+) battery
lead (red) to the positive (+) battery termi-
nal. NOTICE: Reversal of the battery
leads will damage the electrical parts.
(3) Connect the negative (–) amplifier lead
(black) (212X) and the negative (–) bat-
tery lead (black), and the ground lead
(black) to the negative (–) battery termi-
nal.
(4) Make sure that the battery is securely
held in place.
(5) Install the battery cover by installing the
nuts.
6
5
4
3 3
2
1
SportsBoat_F3R10.book Page 162 Monday, June 27, 2016 3:22 PM
Loading ...
Loading ...
Loading ...