Loading ...
Loading ...
Loading ...
Instrument operation
50
Resetting the settings to the default
settings
Tap the “ ” button to reset the settings
to their factory default settings.
The default settings are as follows:
● Depth alarm: 4 ft
● Day mode brightness: 100%
● Night mode brightness: 50%
● Unit: IMPERIAL
● Language: English
(1) Tap the “ ” button.
1 “RESET” button
(2) Tap the “ ” button on the confirmation
screen.
1 YES” button
No-wake mode/cruise assist switch
This switch activates and sets the no-wake
mode, cruise assist, and reverse RPM con-
trol.
1 No-wake mode/cruise assist switch
To operate the no-wake mode and cruise as-
sist, see the following sections. To activate
the reverse RPM control, see “Reverse RPM
control” on page 52.
Operating the boat with a minimal
wake (no-wake mode)
The no-wake mode is useful for operating the
boat at a steady speed with a minimal wake.
This is especially convenient when traveling
in harbors, channels, or other areas posted
with low speed limits as “no wake zones”.
The no-wake mode can be used only when
the engines are operating at idle speed.
To activate the no-wake mode:
(1) Put the remote control levers in the TDE
position or forward position so that both
engines are operating at idle speed.
(2) Push the plus side of the no-wake
mode/cruise assist switch. Once “No
Wake Mode” is displayed in the multi-
function meter, the no-wake mode is acti-
vated.
RESET
RESET
1.5 Hrs
PORT
1.6 Hrs
STBD
STBD 1.6 Hrs
RESET
Reset To
Factory?
- Reset to Factory -
4
Depth
ft
50
Fuel
%
10:15 am
1
YES
1.5 Hrs
PORT
1.6 Hrs
STBD
STBD 1.6 Hrs
YES
Are you sure?
- Reset to Factory -
4
Depth
ft
50
Fuel
%
10:15 am
1
1
SportsBoat_F3R10.book Page 50 Monday, June 27, 2016 3:22 PM
Loading ...
Loading ...
Loading ...