Loading ...
Loading ...
Loading ...
The essentials
●
Grip the end of
the bo
x
spanner and turn
the wheel bolt about one turn anti-clockwise
››› Fig. 63.
Tightening wheel bolts
●
Insert the box spanner onto the wheel bolt
as far as it will go
1)
.
●
Grip the box spanner as close to the end as
possible and tighten the bolt firmly by turn-
ing clockwise.
WARNING
The wheel bolts should only be loosened
slightly (about
one turn) before raising the
vehicle with the jack. Risk of accident!
Raising the vehicle
Fig. 64 Changing a wheel: jack position
points.
Fig. 65 Fitting the jack.
To place the jack, locate the jacking point un-
der the door s
i
l
l closest to the wheel to be
changed ››› Fig. 64. The jacking point is un-
derneath the stamp on the door sill.
●
Raise the jack, turning the crank handle to
wind it up under the jacking point until its
claw is directly below the jacking point of the
door sill.
»
1)
The corresponding adapter is required to unscrew
or tighten the anti-theft
wheel bolts ››› page 48.
49
Loading ...
Loading ...
Loading ...