Loading ...
Loading ...
Loading ...
Operation
Verification of correct placement
Fig. 199 Correct placement of the ball-head-
ed b
ar
.
Before using the ball-headed bar, ensure it is
c
orr
ectly
fitted.
Ensure that:
●
The ball-headed bar does not come out of
the clamping bush in a “jerky” manner.
●
The red mark
A
›
›
› Fig. 199
on the manual
regulator signals toward the white mark on
the ball-headed bar.
●
The manual regulator is adjusted to the
ball-headed bar, leaving no space between
them.
●
The regulator is locked and the key has
been removed.
●
Cover
B
has been placed over the manual
r
e
gu
lator lock.
WARNING
Only use the towing bracket device when the
bal
l-headed bar is properly fitted!
Disassembly of the ball-headed bar
Fig. 200 Remove the key slot cover/unlock
w
ith the k
ey
.
Fig. 201 Unblock the ball-headed bar.
–
Remove cover
A
from over the regulator
k
ey
s
lot in the direction of arrow
1
››› Fig. 200.
–
Insert key
B
in the key slot.
–
Open the manual regulator lock by turning
k
ey
B
fully to the left in the direction of ar-
r
o
w
2
. The arrow on the key points to the
“u
n
loc
ked” symbol.
–
Hold the ball-headed bar from underneath
››› Fig. 201 and remove manual regulator
C
with your other hand in the direction of
arr
o
w
3
.
–
Turn the removed regulator fully in the di-
r
ection of
arr
ow
4
and hold it firmly in this
po
s
ition.
–
R
emove the ball-headed bar from the
clamping bush, pulling downward in the di-
rection of arrow
5
.
192
Loading ...
Loading ...
Loading ...