Loading ...
Loading ...
Loading ...
Transport and practical equipment
●
Never ex
ceed the allowed axle loads or al-
lowed maximum weight. Risk of accident!
CAUTION
●
On
ly u
se SEAT-authorised roof carriers.
●
Where roof carriers from other systems are
used or where they are not fitted properly,
any damage caused to the vehicle will not be
covered by the warranty. Therefore, carefully
follow the Instruction Manual for installation
of the roof carrier.
●
Remember that the rear lid must not hit the
roof load.
●
The total height of the vehicle increases ac-
cording to the roof load. Compare the height
of the vehicle with the heights of bridges or
other underpasses, for example, the height
of the garage door.
●
Do not forget to remove the roof carrier be-
fore entering an automatic carwash.
●
Take into account that the load must not
damage the aerial located on the roof.
For the sake of the environment
If aerodynamic resistance increases, fuel con-
sumption wi
ll also increase.
Attachment points
Fig. 168 Basic roof carrier attachment points.
Location of the basic roof carrier attachment
points
›
›
› Fig. 168:
Rear attachment points
Front attachment points
Install and remove following the instructions
given.
A
B
CAUTION
Follow the instructions given in the manual.
Roof load
The maximum permissible roof load (includ-
ing the sup
port system) of 75 kg and the to-
tal authorised weight of the vehicle must not
be exceeded.
It will not be possible to carry the full maxi-
mum load if the roof carrier you are using is
rated for a load which is less than this figure.
In this case, you can only load the roof carrier
to the maximum load permitted in your in-
stallation manual.
145
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...