User Manual - Page 132

For TOLEDO 2017.

Loading ...
Loading ...
Loading ...
Operation
Switching off the wipers
Move the lever to position
0
Fig. 142
.
WARNING
The rain sensor may not detect enough rain
to swit
ch on the wipers.
If necessary, switch on the wipers manually
when water on the windscreen obstructs visi-
bility.
Note
Do not put stickers on the windscreen in front
of the r
ain sensor*. This may cause sensor
disruption or faults.
Headlight washers*
The headlight washers operate briefly if the
dip
ped he
a
dlights or headlights are on and
the lever is moved to position
5
Fig. 142.
The headlight washer system also operates
every 10 windscreen wash cycles.
Clean off stubborn dirt (insects, etc.) from the
headlights at regular intervals, for instance
when filling the fuel tank. Please observe the
following indications
page 198, Head-
lights.
To ensure the system works properly in win-
ter, keep the nozzle holders free of snow and
remove any ice with a de-icer spray.
CAUTION
Never pull on the nozzle holders. Risk of
damag
e to the system!
Mirrors
Rear
view mirror with manual anti-
dazzle device
Basic settings
Push the lever at the bottom of the mirror
f
or
w
ard.
Rear vision mirror anti-dazzle setting
Pull the lever at the bottom of the mirror to-
wards you.
Exterior mirrors
Read the additional information carefully
page 13
Before beginning any journey, adjust the rear
view mirrors for a good rear visibility.
WARNING
Conv
ex (wide-angle) rear vision mirrors give
a larger field of vision. However, they make
objects appear smaller and further away than
they really are. For this reason, you should
not rely on these rear vision mirrors for judg-
ing the dis
tance of vehicle behind.
If possible, use the interior rear vision mir-
ror to estimate distances to vehicles behind
you.
Note
Ext
erior mirror
s are only heated when the
engine is running.
Do not touch the exterior mirrors when the
heating system is running.
If the electrical adjustment should ever fail
to operate, the rear vision mirrors can be ad-
justed by hand by pressing the edge of the
mirror glass.
Visit the technical service in the event of a
fault in the electrical rear vision mirror ad-
justment system.
130
Loading ...
Loading ...
Loading ...