Loading ...
Loading ...
Loading ...
Technical data
Vehicle model
Identif
y
in
g letters of the gearbox/number
of the original paint finish/Interior equip-
ment number/engine power/engine
identifying letter
Partial description of the vehicle
Diameter of authorised tyre in inches
1)
Type plate
The model plate is located at the bottom of
the B pillar, between the front and rear doors,
on the right-hand side.
The type plate indicates the following
weights:
●
Total permitted weight of the vehicle when
loaded
●
Maximum authorised weight of the vehicle
with a trailer, when the vehicle operates as a
tractor
●
Maximum permitted load of the front axle
●
Maximum permitted load of the rear axle
Weight in running order
The weight in running order only has one ap-
proximate value. This value corresponds to
the minimum operative weight of the vehicle
without additional equipment that increases
2
3
4
5
its weight, i.e. air conditioning, spare wheel,
t
o
w
ing bracket.
The running order weight also includes 75 kg
of the weight of the driver and service fluids,
in addition to a fuel tank at 90% capacity.
From the difference between the total permit-
ted weight in running order the approximate
carrying capacity can be calculated ›››
.
The c
arr
y
ing capacity must include:
●
occupants,
●
all pieces of equipment and other weights,
●
roof loads including the roof rack,
●
equipment that is not included in the run-
ning order weight,
●
when using the towing bracket, the draw-
bar load (max. 50 kg)
Calculating fuel consumption and CO
2
emis-
sions according to the ECE regulations and
the EU specifications
Calculation of fuel consumption for urban
driving begins when cold-starting the engine.
Then, normal city driving is simulated.
In calculating extra-urban driving fuel con-
sumption, braking and acceleration is done
in all gears, as in daily use of the vehicle.
Driving speed varies within a range of 0 and
120 km/h (75 mph).
The consumption value in combined driving
is composed of 37% of the value of urban
driving and 63% of the value of extra-urban
driving.
WARNING
The maximum permitted weight values must
not be ex
ceeded – Risk of an accident and
damage to the vehicle!
Note
●
If y
ou wish to calculate the exact weight of
your vehicle please contact a SEAT dealer.
●
Depending on the volume of equipment,
driving style, road conditions, weather condi-
tions and the condition of the vehicle, con-
sumption values can differ from the theoreti-
cal values stated here.
Information on fuel consump-
tion
F
uel
c
onsumption
Approved consumption values are derived
fr
om me
a
surements performed or supervised
by certified EU laboratories, according to the
legislation in force at the time (for more infor-
mation, see the Publications Office of the
1)
Valid only for certain countries.
224
Loading ...
Loading ...
Loading ...